I added "Lift-the-Dot" fasteners and they work great.
Joe
-----Original Message-----
From: spitfires-bounces@autox.team.net
[mailto:spitfires-bounces@autox.team.net] On Behalf Of Stuart Greenwood
Sent: Thursday, May 21, 2009 9:50 PM
To: spitfires@autox.team.net
Subject: [Spits] Tonneau cover attachment
I have an original factory tonneau which at the front has metal eye holes
where it slips of the pegs on the top of the dash. But it tends to fly off
in
the wind. To me this can only work if the tonneau is a tight fit so the
eyes
hold fast beneath the lip on the pegs. Is this correct or am I missing some
kind of fastener? Maybe like the ones used on some TR2/3s which have a
spring
clip on each side of the part attached to the tonneau so the spring
compresses as it slips over the lip on the pegs and then snaps back to grip
the peg
Stuart a Greenwood
71 Mk IV Spitfire, 71Mk 1 Stag
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|