Hi Mark, thanks for the reply
I want to do just the opposite. I want to 'convert' the grinder with the
smaller
spindle to 5/8 so I can use my disc in it. I keep several grinders ready. One
with a cutoff wheel, one with grinding rock and one with a flap disk.. and one
with a wire]
wheel... saves time switching out media...
john
----- Original Message -----
From: Mark J Bradakis <mark@bradakis.com>
To: <shop-talk@autox.team.net>
Sent: 7/29/2020 10:03:52 PM
Subject: Re: [Shop-talk] angle grinder spindle adapter
________________________________________________________________________________
On 7/29/20 2:10 PM, john niolon wrote:
> I have two Milwaukee grinders
> a 6145 with a 1/2"-13 spindle and
> a 6148 with a 5/8-11 spindle...
> I can't find grinding rocks or cut off discs with a 1/2 arbor hole
> plus I have a large box full of 5/8"
What, exactly, are you trying to accomplish here? You have a grinder
that will work with your box full of 5/8 stuff. You can't find stuff
that fits the 1/2" grinder, so you want to convert the 5/8 grinder that
works with what you have to 1/2 inch that won't work with what you
have. Am I reading this correctly?
mjb.
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
|