This is a multi-part message in MIME format
--===============7124686439338720727==
This is a multi-part message in MIME format
--JmyjslLve8jc49mKroDkFJnLCIajfsX=_i
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Hi Mark, I found the same on Amazon but the internal threads are 1/2=
-20 and I=20
need 1/2-13 so that=20
won't work... although the thing on msc site
might do the trick... I wonder if it's=20
considered a one time on/off adapter, or would it take multiple on/off=
cycles=20
on the external=20
5/8" thread ?? =20
don't know what the red material on the adapter is.. I'll bookmark th=
at page
I contacted a local tool repair place (Toolsmith) explained my proble=
m and he found a 6148 spindle (like mine) and he offered to try it in =
the
6145 grinder if I brought it by to see if it would fit... he cautione=
d that the gear drive might be larger for the larger spindle though. =
I'm gonna go by
there next week and see what happens
Worst case is that I use the small spindle grinder for disk that are n=
ot threaded and use the spindle nut reversed to take up the slack in a=
5/8 hole disc
and use the grinder with the 5/8 spindle for the threaded stuff... I=
t would be nice if everything worked in everything, but that has never=
happened in my 73 years=20
(tomorrow) on this earth, why should it happen now ???
2020 sheese=E2=80=A6 I think I hear thunder... but based on this yea=
r... it could be Godzilla !!!!!
john
----- Original Message -----
From: Mark Andy <marka@maracing.com>
To: john niolon <jniolon@att.net>
Cc: John Miller <jem@milleredp.com>, shop-talk <shop-talk@autox.team.n=
et>
Sent: 7/30/2020 3:30:00 PM
Subject: Re: [Shop-talk] angle grinder spindle adapter
Howdy,
Something like this maybe?
https://www.amazon.com/IVY-Classic-28112-Adaptor-Adapts/dp/B0052IP99C/=
ref=3Dpd_lpo_263_t_0/141-5120391-8035615?_encoding=3DUTF8&pd_rd_i=3DB0=
052IP99C&pd_rd_r=3D9da3ea3d-acde-4e6f-94a6-13d94c9c6a32&pd_rd_w=3DpjbP=
b&pd_rd_wg=3DSQws5&pf_rd_p=3D7b36d496-f366-4631-94d3-61b87b52511b&pf_r=
d_r=3DTBP2C4EEVYMJJ48G1QHT&psc=3D1&refRID=3DTBP2C4EEVYMJJ48G1QHT=20
I'm not sure what thread pitch a 5/8"=20
grinder spindle uses.=20
There's not a lot of wall thickness for a 5/8" to 1/2" adapter. Would=
n't=20
surprise me if regular / coarse pitch stuff=20
wouldn't have enough wall thickness for an adapter to work?
It does look like there'=20
some type of thread repair thing for those pitches though:
https://www.mscdirect.com/product/details/05864434=20
Mark=20
Mark=20
On Thu, Jul 30, 2020 at 4:18 PM john niolon <jniolon@att.net> wrote:
grinder does have a spindle nut that can be reversed to hold the large=
r=20
wheel... but the majority of
my 5/8" accessories are threaded
j
----- Original Message -----
From: John Miller <jem@milleredp.com>
To: <shop-talk@autox.team.net>
Sent: 7/30/2020 11:05:07 AM
Subject: Re: [Shop-talk] angle grinder spindle adapter
______________________________________________________________________=
__________
> I want to do just the opposite. I want to 'convert' the grinder wit=
h the smaller
> spindle to 5/8 so I can use my disc in it. I keep several grinders =
ready. One
> with a cutoff wheel, one with grinding rock and one with a flap disk=
=2E. and one with a wire]
> wheel... saves time switching out media...
Doesn't the grinder already have a...uh...uh...thing that if you flip =
it=20
over it's got a 5/8in boss on it to center the wheel?
I have never encountered an angle grinder that didn't have a centering=
=20
thing for a 5/8in wheel no matter the shaft size.
John.
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net=
/archive
iolon@att.net
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net=
/archive
rka@maracing.com
--JmyjslLve8jc49mKroDkFJnLCIajfsX=_i
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
<HTML><HEAD>
<STYLE type=3Dtext/css> body { margin:0.7em; } body.OECFntDef, body.OE=
CFntDef div { font-family:"Segoe UI",Tahoma,Verdana,Arial,Helvetica,sa=
ns-serif;font-size:12pt; }</STYLE>
<META name=3DGENERATOR content=3D"MSHTML 11.00.10570.1001"></HEAD>
<BODY spellcheck=3Dtrue class=3DOECFntDef>
<DIV>Hi Mark, I found the same on Amazon but the internal =
threads are 1/2-20 and I need 1/2-13 so that won't work... although th=
e thing on msc site</DIV>
<DIV>might do the trick... I wonder if it's considered a one time on/o=
ff adapter, or would it take multiple on/off cycles on the external 5/=
8" thread ?? </DIV>
<DIV>don't know what the red material on the adapter is.. I'll b=
ookmark that page</DIV>
<DIV> </DIV>
<DIV>I contacted a local tool repair place (Toolsmith) explained=
my problem and he found a 6148 spindle (like mine) and he offered to =
try it in the</DIV>
<DIV>6145 grinder if I brought it by to see if it would fit... h=
e cautioned that the gear drive might be larger for the larger spindle=
though. I'm gonna go by</DIV>
<DIV>there next week and see what happens</DIV>
<DIV> </DIV>
<DIV>Worst case is that I use the small spindle grinder for disk that =
are not threaded and use the spindle nut reversed to take up the slack=
in a 5/8 hole disc</DIV>
<DIV>and use the grinder with the 5/8 spindle for the threaded stuff..=
=2E It would be nice if everything worked in everything, b=
ut that has never happened in my 73 years </DIV>
<DIV>(tomorrow) on this earth, why should it happen now ???</DIV=
>
<DIV> </DIV>
<DIV>2020 sheese=E2=80=A6 I think I hear thunder... but ba=
sed on this year... it could be Godzilla !!!!!</DIV>
<DIV> </DIV>
<DIV>john</DIV>
<DIV> </DIV>
<DIV> </DIV>
<BLOCKQUOTE style=3D"PADDING-BOTTOM: 0px; PADDING-TOP: 0px; PADDING-LE=
FT: 0.5em; BORDER-LEFT: #c7e5ff 1px solid; MARGIN: 0px 0px 0px 0.5em; =
PADDING-RIGHT: 0px">
<DIV><B>----- Original Message -----</B></DIV>
<DIV><B>From:</B> Mark Andy <<A>marka@maracing.com</A>></DIV>
<DIV><B>To:</B> john niolon <<A>jniolon@att.net</A>></DIV>
<DIV><B>Cc:</B> John Miller <<A>jem@milleredp.com</A>>, shop-tal=
k <<A>shop-talk@autox.team.net</A>></DIV>
<DIV><B>Sent:</B> 7/30/2020 3:30:00 PM</DIV>
<DIV><B>Subject:</B> Re: [Shop-talk] angle grinder spindle adapter</DI=
V>
<HR style=3D"BORDER-TOP: medium none; HEIGHT: 1px; BORDER-RIGHT: mediu=
m none; BORDER-BOTTOM: medium none; COLOR: #ccc; BORDER-LEFT: medium n=
one; BACKGROUND-COLOR: #ccc">
<DIV dir=3Dltr>Howdy,
<DIV><BR></DIV>
<DIV>Something like this maybe?<BR><BR><A href=3D"https://www.amazon.c=
om/IVY-Classic-28112-Adaptor-Adapts/dp/B0052IP99C/ref=3Dpd_lpo_263_t_0=
/141-5120391-8035615?_encoding=3DUTF8&pd_rd_i=3DB0052IP99C&pd_=
rd_r=3D9da3ea3d-acde-4e6f-94a6-13d94c9c6a32&pd_rd_w=3DpjbPb&pd=
_rd_wg=3DSQws5&pf_rd_p=3D7b36d496-f366-4631-94d3-61b87b52511b&=
pf_rd_r=3DTBP2C4EEVYMJJ48G1QHT&psc=3D1&refRID=3DTBP2C4EEVYMJJ4=
8G1QHT">https://www.amazon.com/IVY-Classic-28112-Adaptor-Adapts/dp/B00=
52IP99C/ref=3Dpd_lpo_263_t_0/141-5120391-8035615?_encoding=3DUTF8&=
pd_rd_i=3DB0052IP99C&pd_rd_r=3D9da3ea3d-acde-4e6f-94a6-13d94c9c6a3=
2&pd_rd_w=3DpjbPb&pd_rd_wg=3DSQws5&pf_rd_p=3D7b36d496-f366=
-4631-94d3-61b87b52511b&pf_rd_r=3DTBP2C4EEVYMJJ48G1QHT&psc=3D1=
&refRID=3DTBP2C4EEVYMJJ48G1QHT</A> </DIV>
<DIV><BR></DIV>
<DIV>I'm not sure what thread pitch a 5/8" grinder spindle uses. =
<BR><BR>There's not a lot of wall thickness for a 5/8" to 1/2" adapter=
=2E Wouldn't surprise me if regular / coarse pitch stuff wouldn'=
t have enough wall thickness for an adapter to work?<BR><BR>It does lo=
ok like there' some type of thread repair thing for those pitches thou=
gh:<BR><BR><A href=3D"https://www.mscdirect.com/product/details/058644=
34">https://www.mscdirect.com/product/details/05864434</A> <BR><B=
R>Mark <BR><BR>Mark <BR></DIV></DIV><BR>
<DIV class=3Dgmail_quote>
<DIV class=3Dgmail_attr dir=3Dltr>On Thu, Jul 30, 2020 at 4:18 PM john=
niolon <<A>jniolon@att.net</A>> wrote:<BR></DIV>
<BLOCKQUOTE class=3Dgmail_quote style=3D"PADDING-LEFT: 1ex; BORDER-LEF=
T: rgb(204,204,204) 1px solid; MARGIN: 0px 0px 0px 0.8ex">grinder does=
have a spindle nut that can be reversed to hold the larger wheel...&n=
bsp; but the majority of<BR>my 5/8" accessories are threaded<BR><BR>j<=
BR><BR>----- Original Message -----<BR>From: John Miller <<A target=
=3D_blank>jem@milleredp.com</A>><BR>To: <<A target=3D_blank>shop=
-talk@autox.team.net</A>><BR>Sent: 7/30/2020 11:05:07 AM<BR>Subject=
: Re: [Shop-talk] angle grinder spindle adapter<BR>___________________=
_____________________________________________________________<BR><BR>&=
gt; I want to do just the opposite. I want to 'convert' the grin=
der with the smaller<BR>> spindle to 5/8 so I can use my disc in it=
=2E I keep several grinders ready. One<BR>> with a cuto=
ff wheel, one with grinding rock and one with a flap disk.. and one wi=
th a wire]<BR>> wheel... saves time switching out media...<BR=
><BR>Doesn't the grinder already have a...uh...uh...thing that if you =
flip it <BR>over it's got a 5/8in boss on it to center the wheel?<BR><=
BR>I have never encountered an angle grinder that didn't have a center=
ing <BR>thing for a 5/8in wheel no matter the shaft size.<BR><BR>John.=
<BR>_______________________________________________<BR><BR><A target=3D=
_blank>Shop-talk@autox.team.net</A><BR>Donate: <A href=3D"http://www.t=
eam.net/donate.html" rel=3Dnoreferrer target=3D_blank>http://www.team.=
net/donate.html</A><BR>Suggested annual donation $12.96<BR>Archi=
ve: <A href=3D"http://www.team.net/pipermail/shop-talk"; rel=3Dnoreferr=
er target=3D_blank>http://www.team.net/pipermail/shop-talk</A> <A href=
=3D"http://autox.team.net/archive"; rel=3Dnoreferrer target=3D_blank>ht=
tp://autox.team.net/archive</A><BR><BR>Unsubscribe/Manage: <A href=3D"=
http://autox.team.net/mailman/options/shop-talk/jniolon@att.net"; rel=3D=
noreferrer target=3D_blank>http://autox.team.net/mailman/options/shop-=
talk/jniolon@att.net</A><BR>__________________________________________=
_____<BR><BR><A target=3D_blank>Shop-talk@autox.team.net</A><BR>Donate=
: <A href=3D"http://www.team.net/donate.html"; rel=3Dnoreferrer target=3D=
_blank>http://www.team.net/donate.html</A><BR>Suggested annual donatio=
n $12.96<BR>Archive: <A href=3D"http://www.team.net/pipermail/sh=
op-talk" rel=3Dnoreferrer target=3D_blank>http://www.team.net/pipermai=
l/shop-talk</A> <A href=3D"http://autox.team.net/archive"; rel=3Dnorefe=
rrer target=3D_blank>http://autox.team.net/archive</A><BR><BR>Unsubscr=
ibe/Manage: <A href=3D"http://autox.team.net/mailman/options/shop-talk=
/marka@maracing.com" rel=3Dnoreferrer target=3D_blank>http://autox.tea=
m.net/mailman/options/shop-talk/marka@maracing.com</A><BR><BR></BLOCKQ=
UOTE></DIV></BLOCKQUOTE></BODY></HTML>
--JmyjslLve8jc49mKroDkFJnLCIajfsX=_i--
--===============7124686439338720727==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
--===============7124686439338720727==--
|