This is a multi-part message in MIME format.
--===============6518594847099951442==
boundary="------------13583B26E3D923B55B975620"
Content-Language: en-US
This is a multi-part message in MIME format.
--------------13583B26E3D923B55B975620
Content-Transfer-Encoding: 8bit
I second the pattern following cove bit. Use a holesaw to make a hole
of the desired diameter in a piece of hardboard or plywood and carve out
the wood. If you want a more of a dished hole insead of a flat bottom
one, have several circle templates. Start with smaller one and go a bit
deeper the move up to larger circles and cut shallower. You will then
have to use some sort of sanding/carving method to taper the routed bits.
Brian
On 12/13/2018 10:31 AM, eric--- via Shop-talk wrote:
> I'm making a piece of furniture that needs to have a rounded 'dish'
> cut into it. Like a cove cut on a board, but just in a circle. Think
> of a change plate where there is a bowl cutout on a board.
>
> The cut would look like if you had a table saw blade about 1/2" out of
> the table, then put a piece of wood straight down on it and twisted it
> in a circle. I know that wouldn't work (and would be HUGELY unsafe.)
>
> Here is an image of the cut I am trying to make (there are two of them
> on this valet..
>
> https://www.etsy.com/listing/229799235/mens-valet-mens-valet-change-dish-modern
>
>
>
> Anyone know how to do that? I can only find ways to make a cove
> lengthwise in a board. The piece isn't small enough to put in a
> lathe (but I thought about making an insert, and that is my last
> resort, but I would rather not do that.)
>
> Thanks in advance!
>
> Sent from my Commodore 64 on a 2400 Baud Modem.
> Tech Viper
> "Be as beneficent as the sun or the sea, but if your rights as a
> rational being are trenched on, die on the first inch of your
> territory." Ralph Waldo Emerson
>
>
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/pipermail/shop-talk
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/bk13@earthlink.net
>
--------------13583B26E3D923B55B975620
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
</head>
<body text="#000000" bgcolor="#FFFFFF">
I second the pattern following cove bit. Use a holesaw to make a
hole of the desired diameter in a piece of hardboard or plywood and
carve out the wood. If you want a more of a dished hole insead of a
flat bottom one, have several circle templates. Start with smaller
one and go a bit deeper the move up to larger circles and cut
shallower. You will then have to use some sort of sanding/carving
method to taper the routed bits.<br>
<br>
Brian<br>
<br>
<div class="moz-cite-prefix">On 12/13/2018 10:31 AM, eric--- via
Shop-talk wrote:<br>
</div>
<blockquote type="cite"
cite="mid:OF6429C4D7.17665CC1-ON85258362.006494B1-85258362.0065C555@mail.megageek.com">
<meta http-equiv="content-type" content="text/html;
charset=windows-1252">
<font size="2" face="sans-serif">I'm making a piece of furniture
that needs
to have a rounded 'dish' cut into it. Like a cove cut on a
board,
but just in a circle. Think of a change plate where there is a
bowl
cutout on a board.</font>
<br>
<br>
<font size="2" face="sans-serif">The cut would look like if you
had a
table saw blade about 1/2" out of the table, then put a piece of
wood
straight down on it and twisted it in a circle. I know that
wouldn't
work (and would be HUGELY unsafe.)</font>
<br>
<br>
<font size="2" face="sans-serif">Here is an image of the cut I am
trying
to make (there are two of them on this valet..</font>
<br>
<br>
<a
href="https://www.etsy.com/listing/229799235/mens-valet-mens-valet-change-dish-modern";
moz-do-not-send="true"><font size="2" face="sans-serif"
color="blue">https://www.etsy.com/listing/229799235/mens-valet-mens-valet-change-dish-modern</font></a>
<br>
<br>
<font size="2" face="sans-serif">Anyone know how to do that? I
can only find ways to make a cove lengthwise in a board. The
piece isn't small enough to put in a lathe (but I thought about
making
an insert, and that is my last resort, but I would rather not do
that.)</font>
<br>
<br>
<font size="2" face="sans-serif">Thanks in advance!<br>
<br>
Sent from my Commodore 64 on a 2400 Baud Modem.<br>
Tech Viper<br>
"Be as beneficent as the sun or the sea, but if your rights as a
rational
being are trenched on, die on the first inch of your territory."
Ralph
Waldo Emerson </font>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
<a class="moz-txt-link-abbreviated"
href="mailto:Shop-talk@autox.team.net";>Shop-talk@autox.team.net</a>
Archive: <a class="moz-txt-link-freetext"
href="http://www.team.net/pipermail/shop-talk";>http://www.team.net/pipermail/shop-talk</a>
</pre>
</blockquote>
<br>
</body>
</html>
--------------13583B26E3D923B55B975620--
--===============6518594847099951442==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk
--===============6518594847099951442==--
|