shop-talk
[Top] [All Lists]

Re: [Shop-talk] cove (or 'dish') style cut on a piece of wood.

To: Shop-talk@autox.team.net
Subject: Re: [Shop-talk] cove (or 'dish') style cut on a piece of wood.
From: David Hillman via Shop-talk <shop-talk@autox.team.net>
Date: Thu, 13 Dec 2018 19:23:32 -0500 (EST)
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <OF6429C4D7.17665CC1-ON85258362.006494B1-85258362.0065C555@mail.megageek.com>
User-agent: Alpine 2.20.16 (BSF 172 2016-09-29)
    Well if it can be square, you mount it to your lathe.  I've done that 
before.  If it has to be rectangular, maybe those can be multiple squares 
attached to each other?

    Not recommending this, but kicks, possibly literally...

<https://www.youtube.com/watch?v=nOMlqTbMa8k>

--
  David Hillman
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk



<Prev in Thread] Current Thread [Next in Thread>