shop-talk
[Top] [All Lists]

Re: [Shop-talk] Fwd: Re: Well water hammer?

To: Shop Talk <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Fwd: Re: Well water hammer?
From: Randall <tr3driver@ca.rr.com>
Date: Tue, 26 Aug 2014 18:01:40 +0000
Authentication-results: cdptpa-oedge02 smtp.user=tr3driver@ca.rr.com; auth=pass (LOGIN)
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
Sensitivity: Normal 2014 18:01:40 +0000
> You need to check the Schrader value with the tank empty of water and no
> pressure on the water side (drain open).  With the tank empty of water
> there still should be some pressure on the air side of the bladder,
> can't remember the amount.  

Another, less scientific approach, is to just close off the inlet and open an 
outlet where you can see it.  Wait until the flow stops, then add a little air. 
 If you get some more flow out, add a little more air.  Repeat until the extra 
air doesn't dispel any water.  That will still be less than it should have, but 
enough to prevent water hammer and rapid cycling.

Randall
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>