shop-talk
[Top] [All Lists]

[Shop-talk] car hauler tralier advise.

Subject: [Shop-talk] car hauler tralier advise.
From: battmain at yahoo.com (Battmain)
Date: Thu, 31 May 2012 15:32:58 -0700 (PDT)
References: <alpine.BSF.2.00.1205311153400.67610@itonami.pair.com> <1338481588.76876.YahooMailClassic@web181706.mail.ne1.yahoo.com>
It will most likely work fine for you. . 

For my next trailer, I'm going with
a higher rated axle than the 
dual 1760# 14" tires (3500#) that I have now. I
don't tow much 
weight, but here is my reasoning. I tow long distances. When
the 
bearings decide to take a crap, and you don't know when that will 
occur, you hope  to catch the issue before the spindles get torn up.

That
could be at the side of a highway and as we know it is not 
fun inspecting
or doing anything on the side of the highway. I 
carry a spare axle and
multiple bearings, nuts, etc. The few 
miles on one wheel with a load to get
off the highway, really 
heats up that single bearing set on that side. A
higher rated axle 
will help in that situation. 

Only you can decide if it is
enough. 

B




>________________________________
> From: john niolon
<jniolon at att.net>
>To: shop-talk <shop-talk at autox.team.net> 
>Sent: Thursday,
May 31, 2012 12:26 PM
>Subject: Re: [Shop-talk] car hauler tralier advise.
>
(snip)
>is a mid range  5" channel and 3500# axles usually sufficient ??  like
I said,
>the load is less than 4K and less... don't plan on loaning it out...
that's
>what bends fenders and tongues and strips out the wiring...  see that
enough
>with work trailers... it's amazing how much damage can be done to a
>trailer...expecially when you don't have to pay to fix it..
>
>(snip)

<Prev in Thread] Current Thread [Next in Thread>