> I have a dial indicator and a magnetic base, so there are no
> good tools to
> acquire on this issue,
FWIW, my book recommends using a micrometer to measure the thickness
variation. I don't recall the spec offhand, but it's much tighter than the
runout allowance. Not sure why that is, but it might have something to do
with the ABS.
-- Randall
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|