shop-talk
[Top] [All Lists]

[Shop-talk] Removing Vinyl

Subject: [Shop-talk] Removing Vinyl
From: dmscheidt at gmail.com (David Scheidt)
Date: Fri, 6 May 2011 19:30:52 -0500
References: <453480678.83024.1304725296657.JavaMail.root@sz0012a.westchester.pa.mail.comcast.net>
Unless your signs are on glass forget the razor. There's a plastic  
tool called a little chisler that s handy but failing that a good hard  
plastic bowl scrapper along with heat are the best. Glue goop is for  
after it comes off.

I'd call a few body and detail shops, to get an idea of what it costs.

On May 6, 2011, at 6:41 PM, pdqtr6 at comcast.net wrote:

> I have the task at work of removing a lot of vinyl lettering from  
> the sides of
> the 2 company delivery vans.B  The lettering and logos have been on  
> the vans
> since they were new several years ago, and are quite secure.B  Are  
> there any
> tips or (better yet) trade secrets that you can share?B  I have a  
> real heat
> gun (not a hair dryer), a fresh can of 3M adhesive remover, and an  
> old razor
> blade scraper (which scares the s**t out of me).B  Unfortunately, I  
> also have
> an impatient boss.
>
>
>
> Thanks for any help...B  Tom Walling
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/shop-talk/dmscheidt 
> at gmail.com

<Prev in Thread] Current Thread [Next in Thread>