check a local welding supply store for estimate for repair vrs new
purchase.... lots of times it's cheaper to fix
john
----- Original Message -----
From: "Larry Spector" <lspector@gmail.com>
To: "shop-talk" <shop-talk@autox.team.net>
Sent: Sunday, March 20, 2011 7:20 PM
Subject: [Shop-talk] Oxy/Acetylene regulator repair?
> I've got an old set of Victor SR5/6B oxygen/acetylene regulators. When I
> went to use them today, the oxygen regulator was behaving erratically-
> either not supplying enough O2, or suddenly supplying too much. Is it
> worth
> getting it repaired, or should I just replace them? If repair/refurb is an
> option- any suggestions as to who will do a good job?
>
> The oxygen supply is somewhere around 2000psi, so I don't feel comfortable
> messing with them myself...
>
> Thanks for the help!
>
> Larry
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/jniolon@bham.rr.com
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1498/3519 - Release Date: 03/20/11
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|