shop-talk
[Top] [All Lists]

[Shop-talk] coupling two shafts

Subject: [Shop-talk] coupling two shafts
From: nick at landform.co.uk (nick brearley)
Date: Sun, 09 Jan 2011 18:00:05 +0000
References: <D75729196E474762A5A69021F1EC9F1D@john5043a2d406> <052f01cbaf8b$6a7e7b20$0301a8c0@randall> <4D29B8F8.7040700@landform.co.uk>
On 09/01/2011 13:32, nick brearley wrote:
> then get a 1.75 inch OD bush and bore out to 1.778 inch,
Er, make that "bore out to 1.563 inch ID". The problems that come when 
you try to metricate fractions...

Nick Brearley

<Prev in Thread] Current Thread [Next in Thread>