shop-talk
[Top] [All Lists]

[Shop-talk] coupling two shafts

Subject: [Shop-talk] coupling two shafts
From: TR3driver at ca.rr.com (Randall)
Date: Sat, 8 Jan 2011 15:26:02 -0800
References: <D75729196E474762A5A69021F1EC9F1D@john5043a2d406>
> the output shaft of the gear drive is 3/4" and keyed
> the other shaft is smooth and 1-9/16" diameter. 

Flipping through the MMC web site, I see several "mix n match" shaft
couplings that seem like they would meet your needs.

For example, two 6407K43 plus a 6407K53 might do, for about $60 plus
shipping and tax.
http://www.mcmaster.com/#shaft-couplings/=ai8f3y

-- Randall  

<Prev in Thread] Current Thread [Next in Thread>