shop-talk
[Top] [All Lists]

Re: [Shop-talk] coupling two shafts

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] coupling two shafts
From: nick brearley <nick@landform.co.uk>
Date: Sun, 09 Jan 2011 13:32:40 +0000
On 08/01/2011 23:26, Randall wrote:
> For example, two 6407K43 plus a 6407K53 might do, for about $60 plus
> shipping and tax.
> http://www.mcmaster.com/#shaft-couplings/=ai8f3y
>
How about scroll down the page to Clamp-on Couplings. Try 3084K51. You'd 
need to bore out one end to 3/4 inch and cut a keyway then get a 1.75 
inch OD bush and bore out to 1.778 inch, unless you can find a ready 
made item. MMC carry a_lot_of bushes. It might be possible to bore out 
both ends of a 3084K36. Depends how much spare there is.

Nick Brearley
Wishing MMC operated in the UK
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>