shop-talk
[Top] [All Lists]

Re: [Shop-talk] bead seating tool

To: shop-talk@autox.team.net
Subject: Re: [Shop-talk] bead seating tool
From: Mark Andy <mark@sccaprepared.com>
Date: Sun, 14 Jun 2009 02:35:29 -0400 (EDT)
Howdy,

On Sat, 13 Jun 2009, David Scheidt wrote:
> The other useful trick, which doesn't involve explosions, is to put a
> large ratchet strap around the
> tread of the tire, and tighten it.  sometimes two are required.
> Squeezing the tread moves the beads out, and makes it much easier to
> get air in.

Tried that before the ether.  Its worked on lighter weight tires for me in 
the past, but these 10 ply trailer tires wouldn't compress the center of 
the tire... The tread area itself just buckled.

I didn't try two straps though.  Thought of it, but then wanted to try the 
ether trick.  :-)

Mark
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>