shop-talk
[Top] [All Lists]

Re: [Shop-talk] type of wrench?

To: "Shop Talk" <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] type of wrench?
From: "Steve Hammatt Mount Vernon WA USA" <gsteve@hammatt.com>
Date: Wed, 3 Jun 2009 18:56:29 -0700
Thanks to Pat, Doug and John
Spanner was the word I was trying to think of.
Was able to work around it, now to find an 1-1/2" dia
hole punch!
Enjoy....

Steve Hammatt
Mount Vernon WA USA

----- Original Message ----- 
From: "John Mitchell" <jmitch@snet.net>
To: "Steve Hammatt Mount Vernon WA USA" <gsteve@hammatt.com>
Cc: "Shop Talk" <shop-talk@autox.team.net>
Sent: Wednesday, June 03, 2009 6:21 PM
Subject: Re: [Shop-talk] type of wrench?


> There's a guy on ebay that sells quite a variety of bezel tools and 
> may
> have what you need.  Here's on of his items 200319405455   John 
> Mitchell
>
> Steve Hammatt Mount Vernon WA USA wrote:
>> I've got an instrument face to remove.  The lens is held in by a 
>> "ring
>> nut" that has four external slots (90 degrees apart) that need a
>> socket type wrench with four matching "tangs" that would engage 
>> into
>> the slots.  I cannot use a hinged half-circle wrench that would be
>> parallel to the face.  Anybody remember the name of the type of 
>> drive
>> I'm looking for?
>> Thanks.
>>
>> Steve Hammatt
>> Mount Vernon WA USA
>> _______________________________________________
>> Support Team.Net  http://www.team.net/donate.html
>>
>> You are subscribed as jmitch@snet.net
>>
>> Shop-talk mailing list
>>
>> http://autox.team.net/mailman/listinfo/shop-talk
>>
>> http://www.team.net/archive
>>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.52/2152 - Release Date: 
06/03/09 05:53:00
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>