Why not get a can of that spray stuff the loud mouth guy on TV peddles? ;-)
-----Original Message-----
From: shop-talk-bounces@autox.team.net
[mailto:shop-talk-bounces@autox.team.net] On Behalf Of John Mitchell
Sent: Sunday, January 18, 2009 9:23 PM
To: Shop Talk List
Subject: [Shop-talk] Sweat joint leak
I have a pin hole drip in one of the solder joints in my half inch
hot water line. I shut off the hot water, opened some valves and
drained the line out through a spigot I have in the garage. I thought
Id be able to heat the joint enough to get the solder to flow, but I
can't get the joint hot enough, even with oxy-acetylene. Any
suggestions On how I can repair this? It's a very tiny leak, I just
happed to be looking up and saw the drop hanging on the joint. Thanks
for any help. John Mitchell _______________________________________________
Support Team.Net http://www.team.net/donate.html
You are subscribed as gerrybraz@cablespeed.com
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|