Re: [Shop-talk] oxy-acetylene cutting

["John T. Blair" <jblair1948@cox.net>]

At 02:05 PM 5/28/2008 -0400, eric@megageek.com wrote:

>Quick question about oxy-acetylene cutting.
>When I cut with my torch, the molten metal breconnectsb behind my cut.
>This means that I need to go back and recut the metal to separate it.
>...

>I light the acetylene and reduce the flame until itbs just starting to
>quiet down then add the O2 until the blue flames are just tips.

>What am I doing wrong?

Moose,

Are you are using a cutting tourch, or trying to cut with a welding
tourch?  Usually when you pull the trigger on the cutting tourch,
it adds a lot more oxygen and blows the molten metal off the
piece being cut.

John

John T. Blair  WA4OHZ     email:  jblair1948@cox.net
Va. Beach, Va             
Phone:  (757) 495-8229

          48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
     75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                       65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive