More Oxygen - it should blow it out the bottom, I usually run 40 PSI on the
oxygen.
Carl
On 5/28/08, eric@megageek.com <eric@megageek.com> wrote:
>
> Quick question about oxy-acetylene cutting.
>
> When I cut with my torch, the molten metal b reconnectsb behind my cut.
> This means that I need to go back and recut the metal to separate it.
>
> I have my acetylene set at around 7psi and my O2 at about 20 psi.
>
> I light the acetylene and reduce the flame until itb s just starting to
> quiet down then add the O2 until the blue flames are just tips.
>
> What am I doing wrong?
>
> Thanks.
>
>
>
>
> Moose
>
> "We all know we're dying, And there's no sign of a parachute."
> Tori Amos
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as carl.r.lindahl@gmail.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|