shop-talk
[Top] [All Lists]

Re: [Shop-talk] Stripped Screw heads

To: David Scheidt <dmscheidt@gmail.com>
Subject: Re: [Shop-talk] Stripped Screw heads
From: Berry Kercheval <berry@kerch.com>
Date: Thu, 21 Feb 2008 16:55:48 -0800
David Scheidt wrote:
> The chisel works really well on anything that's large enough diameter,
> particularly if you're going to replace the damn thing the screw goes
> into.  
Yeah that woudl work,  sometimes you have to keep both pieces; once I 
had to remove something like 28 screws, all at least 40 years old, from 
an airplane wing that held the landing gear in place; it was bad enough 
that the shock absorber bushings I was trying to access were $800 a 
side, if I had damaged any of the parts it would have gotten expensive!  
(That's why I no longer own a plane, by the way...)
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>