Also try contacting the local Sears repair center or look up the drill
on their web site to see if they have replacement brushes. They probably
don't have parts listed for that old a drill, but it costs nothing to check.
Peace,
Pat
Thusly spake Eric J Russell:
> You may find that dis-assembly and a good internal
> cleaning/lubrication is all it needs.
>
> If it does need new brushes, bring the remnants to an electric motor
> rebuilder (look for an old shop on the other side of the tracks...).
> Shouldn't be hard to find/make a set of brushes.
>
> Eric Russell
> Mebane, NC
> http://home.mebtel.net/~ejrussell
>
> ----- Original Message -----
> From: "Mark Sansouci"
>
>
>> When I was a sprout, one of the true highlights of my life was
>> spending
>> time with my grandfather.
>>
>> Anyway, he is gone, I still have a love of tools and shops - and the
>> drill. Its a Craftsman "300" 1/4 drill. Which I would guess was
>> made
>> in the late 50s early 60s? All steel (or aluminum). Anyway, it
>> still
>> works - sort of - but with lots of sparks and the smell of ozone
>> from
>> the ventilation slots in the back. I expect the brushes are worn to
>> nothing.
>>
> _______________________________________________
> roadsters@hornesystemstx.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
>
>
--
Pat Horne, Owner, Horne Systems
(512) 797-7501 Voice 5026 FM 2001
Pat@HorneSystemsTx.com Lockhart, TX 78644-4443
www.hornesystemstx.com
-- We support Habitat for Humanity - a hand UP, not a hand OUT --
_______________________________________________
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
|