At 03:22 22/08/2006, you wrote:
>The problem with overhead hoists is they go up and down. Engines need
>to go forwards and backwards, as well as up and down. Of course, you
>can move the car, but they tend to weigh a bit more than their engines
>do. A shop crane lets you move it backwards and forwards. If you're
>short on space, one that comes apart takes less room when not in use
>than a folding one, usually.
In an ideal world this would be the arrangement to have:
You have to add the rsjs but it beats putting the car on dollies...
Plus you won't stub your toe on it.