Re: the annual "compressor lines" question.

To:	shop-talk@autox.team.net
Subject:	Re: the annual "compressor lines" question.
From:	Chris Kantarjiev <cak@dimebank.com>
Date:	Wed, 21 Sep 2005 09:14:35 -0700 (PDT)

> What _I'd_ be concerned about is rust due to the moisture in the air.

This is why some folks choose galvanized. 

And then the other camp chimes in, worrying that the bits
of galvanized surface will chip off and clog the tools...

<Prev in Thread]	Current Thread	[Next in Thread>
the annual "compressor lines" question., Eric RE: the annual "compressor lines" question., Gil Fuqua Re: the annual "compressor lines" question., Mark Andy Re: the annual "compressor lines" question., Arvid Jedlicka Re: the annual "compressor lines" question., Chris Kantarjiev <= Re: the annual "compressor lines" question., Mike Rambour Re: the annual "compressor lines" question., Drew Rogge Re: the annual "compressor lines" question., David Scheidt Re: the annual "compressor lines" question., Don Malling Re: the annual "compressor lines" question., Arvid Jedlicka Re: the annual "compressor lines" question., Steven Trovato Re: the annual "compressor lines" question., Pat Horne Re: the annual "compressor lines" question., nick brearley

Previous by Date:	Re: the annual "compressor lines" question., Arvid Jedlicka
Next by Date:	Stenhoj Autolift anyone?, Mike Lee
Previous by Thread:	Re: the annual "compressor lines" question., Arvid Jedlicka
Next by Thread:	Re: the annual "compressor lines" question., Mike Rambour
Indexes:	[Date] [Thread] [Top] [All Lists]