shop-talk
[Top] [All Lists]

Re: Setting up the Ideal Shop - What are the requirements?

To: shop-talk@autox.team.net
Subject: Re: Setting up the Ideal Shop - What are the requirements?
From: "John T. Blair" <jblair@exis.net>
Date: Wed, 09 Jul 2003 19:21:37 -0400
At 02:18 PM 7/9/03 -0500, Gil Fuqua wrote:

>What equipment would you have?
>What type of flooring, floor covering?
>Lights?
>Shop tables?
>
>Any resources on the web for the garage, garage safety and related subjects?
>
>John T. Blair has a great treatise on tools
>www.team.net/www/morgan/tech/art017_1.html

Gil,

Thanks for the plug.  Also check out my article on media blasting (it's new).
However the link is bad.  Click on it, then look for the "\" going the wrong
way, and change it.  You'll get to it.

Other nice to haves:

1. Compressor - the bigger the better
2. Oxy-acyteline tourch - hot wrench
3. Mig welder
4. Power band saw /w auto shut off for cutting metal
5. Lathe
6. Mill
7. Blasting equ.
8. Hydrolic Press
9. Plasma cutter
10. Saws-all or very good saber saw for cutting metal (if you don't have a
    plasma cutter)

11. Bending break
12. Bead roller

John T. Blair  WA4OHZ          email:  jblair@exis.net
Va. Beach, Va                  Phone:  (757) 495-8229

          48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V
     75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                       65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>