shop-talk
[Top] [All Lists]

Re: Electric Oven Power Requirements

To: shop-talk@autox.team.net
Subject: Re: Electric Oven Power Requirements
From: Mike Rambour <mikey@b2systems.com>
Date: Fri, 06 Sep 2002 11:23:59 -0700
   Thought I would say thanks to everyone who replied, several people 
replied off-list that I should just try it, well I didn't have the oven in 
my garage.

  I do now and its working great, I can even run my compressor and/or my 
wife can run her drier while the oven is on.  I unplugged the top burners 
from behind the panel where they plugged into the knobs and removed them so 
I can use the top for storage and not worry about accidentally turning on 
the burners and causing a fire. I did notice there is a vent that releases 
some heat below one burner so I will put a few bricks on the top to give it 
some space between the top and what I store there plus I will be careful as 
to what I store there.

   Time for some powder coating since I took the day off today :)

        mike

~~~~~ I'd rather be sailing and  ~~~ .oooO  Oooo.  ~~~~~~~~~~~
Mike Rambour                                   (    )  (     )    
Bug Writer er...Programmer                \   )   (   / 
      mikey@b2systems.com                  \_)  (_/  
**********************************************************************
If you want to learn more about the ULTIMATE BRITISH sports car,
then take a look at   http://www.singercars.com/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>