shop-talk
[Top] [All Lists]

painted shop floors

To: <shop-talk@autox.team.net>
Subject: painted shop floors
From: "brad.kahler" <brad.kahler@141.com>
Date: Wed, 20 Mar 2002 11:34:15 -0700
We're getting close to the point of painting our shop floor.  To 
date Susan has used paint stripper to remove patches of the old 
paint, metal scraper to also remove some of the old paint and 
pressure washed the floor along with some degreaser as needed.  
Next step is going to be acid wash the floor with a diluted 
muratic acid.  Painting with Rustoleum 2-part epoxy paint will 
follow soon there after.

What I'm curious about is how well does painted concrete standup 
to use, such as with jack-stands, creepers, roll-around tool 
boxes, floor jacks etc.  Are there some types of rollers that 
cause less damage than others?

It would be a real bummer if the rollers on these tools damaged 
the paint.  Any been-there-don-thats out there?!

Thanks

Brad                 

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>