shop-talk
[Top] [All Lists]

Re: Rust stain removal

To: Gerald Brazil <gerrybraz@voyager.net>
Subject: Re: Rust stain removal
From: Martin <martin@virtual-motors.com>
Date: Wed, 05 Dec 2001 09:10:07 -0600
Don't store pool chemicals like chlorine inside for the same reason.


Gerald Brazil wrote:

> Be careful about using oxalic acid in your shop. A few years ago I used some
> in my basement shop to give an aged appearance to wood. It wasn't much and
> it wasn't for long....but the next morning when I went down to the shop
> everything that was unpainted steel, like the table saw, hand saws etc. had
> a heavy coat of rust on them. It took a lot of work to clean off and they
> never looked the same after. If you must use it in your shop, close all tool
> chests and do it on a warm windy day when you can ventilate the place
> thoroughly.

///
///  shop-talk@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe shop-talk
///
///


<Prev in Thread] Current Thread [Next in Thread>