shop-talk
[Top] [All Lists]

RE: Screwdriving

To: "'jniolon@uss.com'" <jniolon@uss.com>
Subject: RE: Screwdriving
From: Ron Madurski <rmadurski@drd.com>
Date: Tue, 12 Jan 1999 15:03:31 -0600

Pilot holes are also a good thing to use.  Pilot holes and soap (I use
dishsoap) together work wonders.

-----Original Message-----
From: jniolon@uss.com [mailto:jniolon@uss.com]
Sent: Tuesday, January 12, 1999 12:00 PM
To: shop-talk@autox.team.net; ken.landaiche@dlcc.com
Subject: Re: Screwdriving



     lubrication......drag them over a bar of soap good before you drive

     them.  You might also try square drive...they offer a little better

     grip.  


Subject: Screwdriving
Author:  ken.landaiche@dlcc.com at ussinternet
Date:    1/12/99 3:40 PM


Last week I tried to drive some four inch deck screws into studs to hold

some 2.5" furring strips. even with pilot holes, I kept getting near the

end when the bit would slip out of the philips slot and drill it out. 
How do you drive those suckers successfully? The bits were new 
Milwaukees. The drill was an old variable speed Craftsman with no brake.
     
     
Ken Landaiche

<Prev in Thread] Current Thread [Next in Thread>