shop-talk
[Top] [All Lists]

Re: Suspending a hoist

To: "Peter Schauss" <schauss@worldnet.att.net>, <shop-talk@Autox.Team.Net>
Subject: Re: Suspending a hoist
From: "Steve Hammatt" <shammatt@sos.net>
Date: Sat, 3 Oct 1998 12:19:40 -0700
Peter
When I used to pull engines without an engine lift, I'd
throw a 6x6 timber (about 8-12' long) across the joists.
Drill through and install a stout (forged is best) eye-bolt
with fender washers to distribute the immediate load.
The beam would then distribute the full load over many
joists.  Never had a problem.  Just make sure that where
you drill for the eyebolt is good wood, no large knots, etc.
Good luck.
Steve

BTW, double-nuts on the eye-bolt would be an excellent idea!
-----Original Message-----
From: Peter Schauss <schauss@worldnet.att.net>
To: shop-talk@autox.team.net <shop-talk@autox.team.net>
Date: Saturday, October 03, 1998 12:09 PM
Subject: Suspending a hoist


>
>I am thinking about using a 1 ton chain hoist to pull the engine on
>my Healey (about 600 # without the gearbox ).  If I run an eye bolt
>through the ceiling and spread the weight over several joists, will they
>hold the weight safely?  If so, how many joists and what size eye bolt?
>
>I have a two car garage (about 22' x 22').
>
>Thanks,
>Peter Schauss, Long Island, NY
>1963 BJ7
>1980 MGB
>
>



<Prev in Thread] Current Thread [Next in Thread>