oletrucks (date)
February 28, 2000
- [oletrucks] GMC Sparetire Carrier Gasket Seal and Plugs, dcvjrv, 08:15
- Re: [oletrucks] Radio Repair Manual, ADvent, 07:53
- Re: [oletrucks] non-vented gas cap/tank, ROGER GLEASON, 07:40
- Re: [oletrucks] what year is this thing?, ADvent, 07:21
- RE: [oletrucks] Cars & Parts CD-ROM, Jim House, 06:54
- Re: [oletrucks] Radio Repair Manual, EKWatson, 06:19
- Re: [oletrucks] Cars & Parts CD-ROM, Durwood B. Darbin, 00:36
February 27, 2000
- [oletrucks] what year is this thing?, Brager Family, 21:54
- [oletrucks] Throttle spring on 235, J Forbes, 16:23
- [oletrucks] Various Questions, Deve Krehbiel, 15:41
- [oletrucks] Email Outage, Deve Krehbiel, 15:30
- Re: [oletrucks] ruined day, Bruce Damen, 12:24
- [oletrucks] Radio Repair Manual, Allen Jones, 12:09
- Re: [oletrucks] ruined day, G. Simmons, 11:37
- Re: [oletrucks] ruined day, Bruce Damen, 10:31
- [oletrucks] GMC Operator Manuals, Ken Deffenbach, 09:05
- [oletrucks] Cars & Parts CD-ROM, Martin Rosenbaum, 07:07
February 26, 2000
- [oletrucks] ruined day, brad kyle, 22:26
- [oletrucks] Fenton Headers with Stock Intake, BDober, 20:23
- [oletrucks] Where Does Throttle Spring Hook, BDober, 20:08
- [oletrucks] Wheel cylinder, Jim House, 18:47
- Re: [oletrucks] non-vented gas cap/tank, Bruce Damen, 18:29
- Re: [oletrucks] TF gas tanke venting, Wayne Osborne, 16:31
- Re: [oletrucks] Windshield Removal, ADvent, 15:02
- Re: [oletrucks] Dry sump oil pump in a 270?, ADvent, 14:41
- [oletrucks] "Vapor Lock" Summary, The Perfesser, 12:23
- Re: [oletrucks] non-vented gas cap/tank, Rawlin Blake, 11:59
- [oletrucks] TF gas tanke venting, J Forbes, 07:58
- [oletrucks] dry sump oiling on a 270, J Forbes, 07:54
- Re: [oletrucks] non-vented gas cap/tank, Advdesign1, 05:07
- Re: [oletrucks] Brake questions, Advdesign1, 04:58
February 25, 2000
- Re: [oletrucks] Windshield Removal, WR Teto, 23:54
- Re: [oletrucks] Dash / Windshield Removal, WR Teto, 23:51
- Re: [oletrucks] lowering the rear, SBOHNAK, 21:21
- Re: [oletrucks] Dry sump oil pump in a 270?, CLLLSLS, 20:34
- Re: [oletrucks] mystery brush guard, craig k, 20:21
- Re: [oletrucks] Windshield Removal, EEHodges, 19:23
- RE: [oletrucks] Break questions, Jim House, 18:33
- Re: [oletrucks] Brake questions, W&D, 18:31
- Re: [oletrucks] Break questions, Bruce Damen, 18:05
- RE: [oletrucks] Brake questions, Jim House, 15:41
- Re: [oletrucks] Brake questions, varanus, 13:55
- [oletrucks] Break questions, Jim House, 13:01
- [oletrucks] window felt??, David, 12:31
- [oletrucks] Dash / Windshield Removal, WR Teto, 12:04
- RE: [oletrucks] non-vented gas cap/tank, MIKE RAHL, 10:27
- Re: [oletrucks] non-vented gas cap/tank, ADvent, 09:58
- Re: [oletrucks] Steering columns for NM Jim, ADvent, 09:55
- [oletrucks] mystery brush guard, craig k, 09:07
- Re: [oletrucks] Drive link socket, Doug Pewterbaugh, 07:15
- [oletrucks] Dry sump oil pump in a 270?, J Forbes, 06:55
- [oletrucks] Steering columns for NM Jim, J Forbes, 06:53
- [oletrucks] Hood ornament cleaning (chrome/stainless cleaning), J Forbes, 06:49
- Re: [oletrucks] non-vented gas cap/tank, Wayne Osborne, 04:28
- [oletrucks] lowering the rear, Keith, 00:15
February 24, 2000
- Re: [oletrucks] Fentons Hdrs with Stock Intake - Ideas, Antonio R. Tijerino, 23:41
- Re: [oletrucks] non-vented gas cap/tank, WR Teto, 23:41
- Re: [oletrucks] Drive link socket, Charles Culver, 22:12
- Re: [oletrucks] non-vented gas cap/tank, ADvent, 21:18
- [oletrucks] Drive link socket, Samsred72, 20:57
- Re: [oletrucks] I sure would like to see a 51 hood ornament!, varanus, 20:48
- Re: [oletrucks] Gas tanks, Bartman, 20:46
- Re: [oletrucks] Dry sump oiling/timing gear wonderings/driving, Passnb4U, 20:40
- Re: [oletrucks] hood ornament cleaning, Boteler Family, 20:38
- Re: [oletrucks] non-vented gas cap/tank, Advdesign1, 20:28
- [oletrucks] Dry sump oiling/timing gear wonderings/driving accessories, CLLLSLS, 20:27
- Re: [oletrucks] Gas tanks, Alan D. Gingles, 20:17
- Re: [oletrucks] non-vented gas cap/tank, Bruce Damen, 20:12
- Re: [oletrucks] Grille ideas, David, 20:01
- RE: [oletrucks] non-vented gas cap/tank, Kevin D. Pennell, 19:54
- RE: [oletrucks] non-vented gas cap/tank, Tibbers, 19:20
- RE: [oletrucks] non-vented gas cap/tank, Kevin D. Pennell, 19:06
- [oletrucks] non-vented gas cap/tank, Allen Coblentz, 18:07
- Re: [oletrucks] Clutch Head tools and Steering columns and seats, Pastorjon994, 17:42
- Re: [oletrucks] Clutch Head tools and Steering columns and seats andpwr, ADvent, 17:30
- [oletrucks] Gas tanks, Bartman, 17:27
- Re: [oletrucks] 1950 and 1953 frame, Bartman, 17:20
- Re: [oletrucks] Clutch Head tools and Steering columns and seats and, Pastorjon994, 16:29
- [oletrucks] window channel inside drivers side door 1950 AD, Dr. Chris Kesling, 16:21
- Re: [oletrucks] I sure would like to see a 51 hood ornament!, John Maertens, 12:51
- [oletrucks] Clutch Head tools and Steering columns and seats and pwr steering, ADvent, 12:17
- [oletrucks] I sure would like to see a 51 hood ornament!, varanus, 11:52
- Re: [oletrucks] hood ornament cleaning, dcvjrv, 11:17
- [oletrucks] hood ornament cleaning, Justin Hartman, 11:00
- Re: [oletrucks] Fentons Hdrs with Stock Intake - Ideas, Allen Jones, 10:52
- Re: [oletrucks] Suppliers take note Re. paint info., G. Simmons, 10:22
- [oletrucks] Bye bye '51, John Maertens, 09:59
- [oletrucks] Abrasive blasting info, Mark Self, 08:36
- Re: [oletrucks] what a disappointment, J & M Street, 08:28
- Re: [oletrucks] what a disappointment, ADvent, 07:00
- Re: [oletrucks] FYI, J & M Street, 06:48
- [oletrucks] My next TOT article, Advdesign1, 05:27
- [oletrucks] Suppliers take note Re. paint info., Advdesign1, 05:23
- Re: [oletrucks] FYI, Deve Krehbiel, 04:09
February 23, 2000
- Re: [oletrucks] what a disappointment, Christian Deaton, 22:35
- RE: [oletrucks] Fentons Hdrs with Stock Intake - Ideas, Michael Snow, 22:16
- Re: [oletrucks] FYI, G. Simmons, 22:01
- Re: [oletrucks] bed sides, Doug Pewterbaugh, 21:28
- Re: [oletrucks] 1950 and 1953 frame, Alan D. Gingles, 21:17
- Re: [oletrucks] 1950 and 1953 frame, Bartman, 21:07
- Re: [oletrucks] 1950 and 1953 frame, Alan D. Gingles, 20:32
- [oletrucks] Anyone need an oil bath air cleaner?, Passnb4U, 20:31
- Re: [oletrucks] Fentons Hdrs with Stock Intake - Ideas, Passnb4U, 20:28
- [oletrucks] Fentons Hdrs with Stock Intake - Ideas, BDober, 20:23
- [oletrucks] 1950 and 1953 frame, ChevTruk53, 20:00
- Re: [oletrucks] what a disapointment, Bruce Damen, 19:59
- [oletrucks] FYI, Deve Krehbiel, 19:24
- Re: [oletrucks] bed sides, mike warford, 18:39
- [oletrucks] what a disapointment, ADvent, 18:35
- Re: [oletrucks] FYI, Jack Halton, 18:25
- Re: [oletrucks] door handles, Jeff Davis, 18:11
- Re: [oletrucks] The Joy Of A New Toy, Jeff Davis, 18:08
- [oletrucks] Re: [old-chevy-truck] The Joy Of A New Toy, G. Simmons, 17:36
- Re: [oletrucks] Recommendations for vehichle transport, Bruce Damen, 17:28
- Re: [oletrucks] 235 question, MKlepp4335, 17:18
- RE: [oletrucks] Bed mounting, Bill Bailey, 17:15
- [oletrucks] The Joy Of A New Toy, Hudson29, 16:39
- [oletrucks] Server Email Failures, Hudson29, 15:00
- RE: [oletrucks] Recommendations for vehicle transport, Jim House, 14:59
- RE: [oletrucks] 270 worth a rebuild or go V8, Hanlon, Bill, 14:17
- Re: [oletrucks] 235 question, Passnb4U, 13:45
- [oletrucks] Recommendations for vehichle transport, Lisa Olivia, 13:37
- [oletrucks] 235 question, MLayton324, 13:05
- Re: [oletrucks] 270 worth a rebuild or go V8, ADvent, 12:57
- [oletrucks] NAPCO Manual Missing Pages., Kevin D. Pennell, 12:28
- RE: [oletrucks] Bed mounting, Terry Stellman, 11:49
- RE: [oletrucks] Project Update Web Site, Kevin D. Pennell, 10:42
- Re: [oletrucks] wiring harness and grill, EEHodges, 10:42
- [oletrucks] Bed mounting, Charles Culver, 10:22
- [oletrucks] wiring harness and grill, Terry/Annette O'Brien, 09:10
- [oletrucks] RE: (oletrucks) Grill Ideas, Bob Keeland, 08:58
- [oletrucks] 49 Chevy Firetruck, Manny, 08:31
- Re: [oletrucks] Project Update Web Site, WR Teto, 07:57
- RE: [oletrucks] Project Update Web Site, Nelson, Jeff - DTC, 07:55
- Re: [oletrucks] Is It Vapor Lock?, WR Teto, 07:35
- Re: [oletrucks] Mig Welder For Patch Panels, Ross Piercey, 06:29
- Re: [oletrucks] Grille ideas, David, 06:01
- Re: [oletrucks] Vapor Lock, Joe Clark, 05:48
February 22, 2000
- [oletrucks] 270 worth a rebuild or go V8, Christian Deaton, 22:30
- [oletrucks] Axle Stuff., Kevin D. Pennell, 22:29
- [oletrucks] re: F**D lists, Stan Zielinski, 22:18
- [oletrucks] Just a note, Bartman, 21:22
- Re: [oletrucks] Is It Vapor Lock?, ADvent, 21:17
- Re: [oletrucks] Vapor Lock, B&A Kettunen, 21:11
- [oletrucks] door handles, ADvent, 21:10
- Re: [oletrucks] Is It Vapor Lock?, craig k, 20:51
- Re: [oletrucks] Frame - Powder Coating vs. Epoxy Paint, David, 20:46
- Re: [oletrucks] Grille ideas, David, 20:44
- Re: [oletrucks] Is It Vapor Lock?, Wayne Osborne, 20:31
- Re: [oletrucks] Is It Vapor Lock?, Bruce Damen, 20:17
- Re: [oletrucks] Grille ideas, Bartman, 19:55
- [oletrucks] gas guages, brad kyle, 19:18
- Re: [oletrucks] Is It Vapor Lock?, Allen Coblentz, 19:00
- Re: [oletrucks] Is It Vapor Lock?, ADvent, 18:28
- Re: [oletrucks] Is It Vapor Lock?, ADvent, 18:26
- Re: [oletrucks] Frame - Powder Coating vs. Epoxy Paint, Keith, 18:15
- [oletrucks] Vapor Lock, J Forbes, 18:15
- Re: [oletrucks] Pitman and steering arm ball help, ADvent, 18:10
- [oletrucks] Project Update Web Site, Deve Krehbiel, 16:53
- Re: [oletrucks] Is It Vapor Lock?, Bruce Damen, 16:42
- Re: [oletrucks] Frame - Powder Coating vs. Epoxy Paint, W&D, 16:35
- [oletrucks] (no subject), Allen Coblentz, 16:22
- Re: [oletrucks] Is It Vapor Lock?, FARMALLM, 15:29
- Re: [oletrucks] Grille ideas, Jimmy Whitley, 14:53
- [oletrucks] window felt, David, 14:24
- Re: [oletrucks] Pitman and steering arm ball help, Rich Gallagher, 14:10
- Re: [oletrucks] Is It Vapor Lock?, Passnb4U, 13:31
- Fwd: [oletrucks] Mig Welder For Patch Panels, Passnb4U, 13:24
- Re: [oletrucks] Pitman and steering arm ball help, Grant Galbraith, 12:41
- [oletrucks] Frame - Powder Coating vs. Epoxy Paint, Nelson, Jeff - DTC, 12:23
- Re: [oletrucks] F**d lists?, Durwood B. Darbin, 12:04
- [oletrucks] Is It Vapor Lock?, The Perfesser, 11:29
- Re: [oletrucks] Dave Wold, Greg St Pierre, 10:49
- Re: [oletrucks] Pitman and steering arm ball help, Bartman, 10:39
- [oletrucks] AD Wrecker For Sale In SoCal, Hudson29, 10:22
- Re: [oletrucks] Mig Welder For Patch Panels, Keith, 10:15
- Re: [oletrucks] Mig Welder For Patch Panels, Passnb4U, 09:39
- Re: [oletrucks] dot 5 BRAKE fluid, Doug Pewterbaugh, 08:42
- [oletrucks] Dave Wold, dcvjrv, 08:34
- Re: [oletrucks] Mig Welder For Patch Panels, joe, 08:09
- RE: [oletrucks] Pitman and steering arm ball help, Rich Gallagher, 08:07
- Re: [oletrucks] Windshield wipers, Jack Halton, 07:39
- Re: [oletrucks] Pitman and steering arm ball help, Grant Galbraith, 07:08
- Re: [oletrucks] Mig Welder For Patch Panels, Ross Piercey, 06:27
- Re: [oletrucks] Web site for Eastwood?, Vince Kieffer, 00:14
February 21, 2000
- Re: [oletrucks] Mig Welder For Patch Panels, WR Teto, 23:35
- [oletrucks] Grille ideas, J Forbes, 22:19
- Re: [oletrucks] door gunk, B&A Kettunen, 22:03
- Re: [oletrucks] F**d lists?, Josh Keady, 21:45
- Re: [oletrucks] Mig Welder For Patch Panels, Ross Piercey, 21:43
- [oletrucks] Web site for Eastwood?, Charles Culver, 21:23
- Re: [oletrucks] F**d lists?, Charles Culver, 21:21
- [oletrucks] door gunk, David, 21:19
- Re: [oletrucks] Mig Welder For Patch Panels, B&A Kettunen, 20:45
- Re: [oletrucks] 'Transplanting'...all that I found on this., MPHUDAK, 20:38
- RE: [oletrucks] 'Transplanting'...all that I found on this., Kevin D. Pennell, 20:24
- Re: [oletrucks] 'Transplanting'...all that I found on this., Keith, 19:04
- Re: [oletrucks] Texas Swap Meet, ADvent, 18:42
- Re: [oletrucks] Oops! My 270's a boat anchor! (was happy update), Jeff Davis, 18:16
- RE: [oletrucks] Pitman and steering arm ball help, Rich Gallagher, 17:38
- [oletrucks] F**d lists?, MKlepp4335, 17:08
- [oletrucks] Texas Swap Meet, MKlepp4335, 17:04
- Re: [oletrucks] Re: HELP!! update, james salley, 15:55
- Re: [oletrucks] grill ideas, Bill Bailey, 15:54
- Re: [oletrucks] 'Transplanting'...all that I found on this., Pee-Wee, 15:45
- Re: [oletrucks] 'Transplanting'...all that I found on this., Peter Volwerk, 15:34
- [oletrucks] 'Transplanting'...all that I found on this., Pee-Wee, 15:21
- RE: [oletrucks] New to this..., Schorn, Tim, 15:11
- [oletrucks] CCT Subscriptions, SHAWN & JO, 14:40
- Re: [oletrucks] New to this..., Doug Pewterbaugh, 14:12
- Re: [oletrucks] gas guages, David Raphael, 13:32
- [oletrucks] steering column, ADvent, 10:05
- Re: [oletrucks] Pitman and steering arm ball help, Doug Pewterbaugh, 09:53
- [oletrucks] grill ideas, Justin Hartman, 09:42
- [oletrucks] Dating a distributor, J Forbes, 08:35
- [oletrucks] Patch panels, J Forbes, 08:28
- RE: [oletrucks] '55 1st Driveline., Kevin D. Pennell, 08:21
- Re: [oletrucks] '55 1st Driveline., ADvent, 07:32
- RE: [oletrucks] dot 5 BRAKE fluid, Hanlon, Bill, 06:35
- Fw: [oletrucks] Windshield wipers, nateley, 05:09
- Re: [oletrucks] '55 1st Driveline., Advdesign1, 04:35
- Re: [oletrucks] '55 1st Driveline., Advdesign1, 04:29
February 20, 2000
- [oletrucks] OFF SUBJECT: '57 International, CLLLSLS, 22:12
- Re: [oletrucks] '55 1st Driveline., J & M Street, 22:03
- Re: [oletrucks] Windshield wipers, G. Simmons, 21:41
- [oletrucks] '55 1st Driveline., Kevin D. Pennell, 21:38
- [oletrucks] water pumps,, CLLLSLS, 21:32
- Fwd: [oletrucks] Mig Welder For Patch Panels, CyrusR, 20:47
- Re: [oletrucks] Windshield wipers, Deve Krehbiel, 19:43
- Re: [oletrucks] 305 vs 350 PINGING, LandBBall, 19:32
- Re: [oletrucks] Windshield wipers, joe, 19:05
- [oletrucks] water pumps, ADvent, 17:56
- Re: [oletrucks] Windshield wipers, Deve Krehbiel, 17:49
- [oletrucks] Windshield wipers, Terry S. Glines, 17:07
- RE: [oletrucks] Original Chevrolet Master Parts Parts Catalog, Nelson, Jeff - DTC, 16:41
- [oletrucks] Distributor Year, Allen Jones, 14:13
- [oletrucks] Original Chevrolet Master Parts Parts Catalog, Allen Jones, 11:44
- Re: [oletrucks] Mig Welder For Patch Panels, Brian m, 11:26
- [oletrucks] '57 Chevy 1/2-Ton Body Parts, Kevin D. Pennell, 08:51
February 19, 2000
- [oletrucks] Canopy express for sale, G. Simmons, 23:06
- Re: [oletrucks] Sleeving a 270, NSurles, 21:23
- [oletrucks] Sleeving a 270, J Forbes, 20:26
- [oletrucks] Mig Welder For Patch Panels, Ross Piercey, 19:59
- [oletrucks] AD speedometer rpr, Bob Fischer, 19:45
- Re: [oletrucks] Break cylinder question, Advdesign1, 16:55
- Re: [oletrucks] 305 vs 350, TORODRVR, 15:08
- Re: [oletrucks] Double tube flaring tool, ADvent, 14:37
- Re: [oletrucks] Break cylinder question, ADvent, 14:31
- Re: [oletrucks] Break cylinder question, ADvent, 14:27
- Re: [oletrucks] Break cylinder question, ADvent, 14:25
- Re: [oletrucks] Break cylinder question, ADvent, 14:24
- Re: [oletrucks] Oops! My 270's a boat anchor! (was happy update), Jack Halton, 12:18
- [oletrucks] 305 in a 3100-1/2 ton, rtbros, 10:28
- Re: [oletrucks] Break cylinder question, Deve Krehbiel, 09:22
- Re: [oletrucks] Break cylinder question, Grant Galbraith, 08:39
- Re: [oletrucks] Re: Guidance, Bartman, 08:05
February 18, 2000
- Re: [oletrucks] Re: Guidance, WR Teto, 23:54
- Re: [oletrucks] Double tube flaring tool, WR Teto, 23:49
- Fwd: Re: [oletrucks] Guidance, Bob Fischer, 22:47
- Re: [oletrucks] Guidance, Bartman, 22:38
- [oletrucks] Engine Rebuild Costs on an I-6 ?, Eric Johnson, 22:33
- Re: [oletrucks] dot 5 BRAKE fluid, Keith, 22:16
- Re: [oletrucks] Break cylinder question, G. Simmons, 21:47
- [oletrucks] Oops! My 270's a boat anchor! (was happy update), CLLLSLS, 21:21
- Re: [oletrucks] Break cylinder question, Terry S. Glines, 21:07
- Re: [oletrucks] horn button, tcape, 21:03
- Re: [oletrucks] dot 5 BRAKE fluid, MarkNoakes, 20:50
- Re: [oletrucks] 305 vs 350, MarkNoakes, 20:39
- RE: [oletrucks] ' 79 305 and S-10 motor mounts, Ralph Linnell, 20:28
- Re: [oletrucks] dot 5 BRAKE fluid, Bruce Damen, 20:10
- Re: [oletrucks] ' 79 305 and S-10 motor mounts, Bruce Damen, 20:05
- Re: [oletrucks] Break cylinder question, Bruce Damen, 20:00
- [oletrucks] Double tube flaring tool, W&D, 19:51
- Re: [oletrucks] dot 5 BRAKE fluid, Deve Krehbiel, 19:46
- Re: [oletrucks] Zinc plated body, Vince Kieffer, 19:14
- [oletrucks] dot 5 BRAKE fluid, J Forbes, 18:36
- [oletrucks] 305 vs 350, J Forbes, 18:32
- Re: [oletrucks] Zinc plated body, Keith, 18:31
- [oletrucks] Re: Guidance, J Forbes, 18:22
- Re: [oletrucks] ' 79 305 and S-10 motor mounts, jelerath, 18:06
- Re: [oletrucks] Break cylinder question, Grant Galbraith, 17:39
- RE: [oletrucks] Break cylinder question, Eric Johnson, 17:14
- RE: [oletrucks] tire sizing, Eric Johnson, 16:43
- Re: [oletrucks] ' 79 305 and S-10 motor mounts, ADvent, 16:28
- Re: [oletrucks] Break cylinder question, ADvent, 16:25
- Re: [oletrucks] Guidance, ADvent, 16:23
- Re: [oletrucks] New to this..., ADvent, 16:12
- Re: [oletrucks] tire sizing, ADvent, 16:08
- Re: [oletrucks] ' 79 305 and S-10 motor mounts, ADvent, 16:04
- Re: [oletrucks] tire sizing, varanus, 15:05
- [oletrucks] tire sizing, Joseph Rennie Weertz, 14:41
- [oletrucks] 79 305, Perry Smith, 14:39
- Re: [oletrucks] ' 79 305 and S-10 motor mounts, Andy Johns, 14:25
- Re: [oletrucks] Guidance, Bob Fischer, 14:24
- Re: [oletrucks] ' 79 305 and S-10 motor mounts, Dustin Cross, 12:20
- Re: [oletrucks] Break cylinder question, Deve Krehbiel, 12:11
- Re: [oletrucks] ' 79 305 and S-10 motor mounts, Andy Johns, 11:26
- RE: [oletrucks] ' 79 305 and S-10 motor mounts, varanus, 11:06
- [oletrucks] Guidance, Bartman, 10:55
- Re: [oletrucks] Break cylinder question, Grant Galbraith, 10:43
- RE: [oletrucks] ' 79 305 and S-10 motor mounts, Peters, Jon C, 10:35
- Re: [oletrucks] ' 79 305 and S-10 motor mounts, jelerath, 09:29
- [oletrucks] New to this..., Scott and Angela Hibberts, 07:09
- Re: [oletrucks] Break cylinder question, Advdesign1, 04:52
February 17, 2000
- Re: [oletrucks] Zinc plated body, ADvent, 23:29
- Re: [oletrucks] Zinc plated body, ADvent, 23:24
- [oletrucks] Pitman and steering arm ball help, Rich Gallagher, 22:49
- Re: [oletrucks] tapered front bearing, Durwood B. Darbin, 21:44
- Re: [oletrucks] Zinc plated body, Al & Judy, 21:39
- [oletrucks] Recommend a good I-6 rebuilder in Portland, OR?, CLLLSLS, 21:36
- Re: [oletrucks] left door lock, Bruce Damen, 21:32
- [oletrucks] Happy update and some questions (was stuck pistons), CLLLSLS, 21:22
- Re: [oletrucks] Zinc plated body, B&A Kettunen, 21:13
- [oletrucks] left door lock, Pastorjon994, 20:42
- Re: [oletrucks] Break cylinder question, W&D, 20:02
- [oletrucks] Zinc plated body, ADvent, 18:34
- [oletrucks] ' 79 305 and S-10 motor mounts, Andy Johns, 18:34
- [oletrucks] Break cylinder question, Jim House, 18:21
- Re: [oletrucks] 51 panel 3/4 ton, Alan D. Gingles, 16:37
- [oletrucks] 51 panel 3/4 ton, Tully Morrison, 16:11
- [oletrucks] Men's Journal truck article, PJMONES, 14:16
- Re: [oletrucks] 6 lug disk brakes and dual m/c, Byron Schluter, 11:58
- [oletrucks] 58/59 patch panels, Perry Smith, 11:40
- Re: [oletrucks] Brakes--6 lug discs, dual m/cyl, Grant Galbraith, 07:39
- RE: [oletrucks] I-6 turbo wonderings ( tech update), Schorn, Tim, 07:14
February 16, 2000
- Re: [oletrucks] 6 lug disk brakes and dual m/c, Lonnie L. Dickey, 23:10
- [oletrucks] Brakes--6 lug discs, dual m/cyl, J Forbes, 22:15
- [oletrucks] clutch heads and engine numbers, brad kyle, 20:01
- Re: [oletrucks] engine numbers, ADvent, 17:33
- Re: [oletrucks] engine numbers, ADvent, 17:32
- Re: [oletrucks] engine numbers, Jack Halton, 16:55
- [Fwd: [oletrucks] I-6 turbo wonderings], Grant Galbraith, 16:22
- Re: [oletrucks] I-6 turbo wonderings, LandBBall, 15:06
- Re: [oletrucks] engine numbers, ADvent, 15:02
- Re: [oletrucks] how to remove rear break drums?, Grant Galbraith, 13:49
- [oletrucks] horn button, Dale Withroder, 13:44
- Re: [oletrucks] I-6 turbo wonderings, Jack Halton, 13:18
- Re: [oletrucks] I-6 turbo wonderings, LandBBall, 13:01
- Re: [oletrucks] I-6 turbo wonderings, Joseph Rennie Weertz, 12:30
- RE: [oletrucks] All this talk of 6 cylinder performance parts ..., Jack Halton, 12:25
- [oletrucks] engine numbers, ADvent, 10:50
- RE: [oletrucks] All this talk of 6 cylinder performance parts ..., Hanlon, Bill, 09:53
- RE: [oletrucks] water pumps, Rich Gallagher, 09:29
- Re: [oletrucks] tapered front bearing, Durwood B. Darbin, 09:25
- RE: [oletrucks] All this talk of 6 cylinder performance parts ..., MIKE RAHL, 09:08
- Re: [oletrucks] All this talk of 6 cylinder performance parts, Terry White, 09:06
- Re: [oletrucks] 6 lug disk brakes and dual m/c, ADvent, 08:56
- [oletrucks] All this talk of 6 cylinder performance parts ..., Hanlon, Bill, 08:55
- Re: [oletrucks] I-6 turbo wonderings, ADvent, 08:28
- [oletrucks] need part, Rodney Clay, 08:19
- RE: [oletrucks] Wheel Cylinders, Jim House, 08:15
- Re: [oletrucks] 6 lug disk brakes and dual m/c, ADvent, 08:00
- Re: [oletrucks] 6 lug disk brakes and dual m/c, BelAir Bob, 07:34
- [oletrucks] how to remove rear break drums?, Jim House, 06:27
- Re: [oletrucks] 6 lug disk brakes and dual m/c, Grant Galbraith, 06:03
- Re: [oletrucks] I-6 turbo wonderings, MarkNoakes, 06:02
- Re: [oletrucks] I-6 turbo wonderings, Rob Steinmetz, 05:57
- Re: [oletrucks] 6 lug disk brakes and dual m/c, G. Simmons, 00:46
February 15, 2000
- [oletrucks] Manual to Automatic/One drive shaft?, Banjomike, 22:29
- Re: [oletrucks] 6 lug disk brakes and dual m/c, Lonnie L. Dickey, 22:22
- Re: [oletrucks] Dual Master Cylinders, G. Simmons, 21:55
- [oletrucks] I-6 turbo wonderings, CLLLSLS, 21:42
- Re: [oletrucks] Wheel Cylinders, Al & Judy, 21:31
- Re: [oletrucks] 6 lug disk brakes, B&A Kettunen, 21:28
- Re: [oletrucks] Dual Master Cylinders, tcape, 21:23
- Re: [oletrucks] 6 lug disk brakes and dual m/c, Michael and Stephany Zaic, 21:07
- Re: [oletrucks] 6 lug disk brakes, Boteler Family, 21:07
- [oletrucks] 58-59 fender repair, J Forbes, 20:22
- Re: [oletrucks] Items for Sale, Blaine & Maggie Dumkee, 19:47
- Re: [oletrucks] Wheel Cylinders, W&D, 19:35
- Re: [oletrucks] 6 lug disk brakes and dual m/c, G. Simmons, 19:10
- Re: [oletrucks] Clutch head drivers, ADvent, 17:50
- Fwd: [oletrucks] Items for Sale, dcvjrv, 17:29
- Fwd: RE: [oletrucks] Items for Sale, dcvjrv, 17:25
- [oletrucks] Color of Linkages, etc., Deve Krehbiel, 17:13
- Re: [oletrucks] 6 lug disk brakes, Rawlin Blake, 16:57
- [oletrucks] John Elerath - 6 lug disk brakes, Mac Kinghorn, 16:33
- [oletrucks] Wheel Cylinders, Mac Kinghorn, 16:22
- Re: [oletrucks] Clutch head drivers, william moldenhauer, 16:07
- Re: [oletrucks] Play in steering, william moldenhauer, 16:05
- [oletrucks] water pumps, ADvent, 16:01
- [oletrucks] Items for Sale, dcvjrv, 15:00
- Re: [oletrucks] 6 lug disk brakes, LandBBall, 13:30
- [oletrucks] 58 fender patch panels question, varanus, 12:29
- Re: [oletrucks] 6 lug disk brakes, jelerath, 11:15
- Re: [oletrucks] Wheel Cylinders, Passnb4U, 11:03
- [oletrucks] 6 lug disk brakes, Hanlon, Bill, 08:38
- [oletrucks] members photo, Wayne Osborne, 08:30
- Re: [oletrucks] Play in steering, Wayne Osborne, 08:15
- Re: [oletrucks] Jim Carter Service?, dcvjrv, 07:34
- Re: [oletrucks] Wheel Cylinders, dcvjrv, 07:31
- [oletrucks] Dipstick tube removal, J Forbes, 07:25
- [oletrucks] bed sides, J Forbes, 07:15
- [oletrucks] Jim Carter Service?, Jim House, 06:39
- [oletrucks] Wheel Cylinders, Jim House, 06:35
- Re: [oletrucks] More on removing VERY stuck pistons, Jack Halton, 05:02
- [oletrucks] '59 Chevy 1-ton and '64 1-ton frame F/S, Vince Strazzabosco, 01:03
February 14, 2000
- [oletrucks] Re: PHOTOS, Bruce Michaels, 22:13
- Re: [oletrucks] Stuck Pistons, Bruce Michaels, 21:39
- Re: [oletrucks] Stuck Pistons, Jimmy Whitley, 21:35
- Re: [oletrucks] Clutch head drivers, tcape, 21:20
- Re: [oletrucks] Water Decals, ADvent, 21:14
- Re: [oletrucks] Clutch head drivers, Allen Jones, 21:02
- [oletrucks] Clutch head drivers, Mark Self, 20:34
- Re: Re:[oletrucks] Water from steel, G. Simmons, 20:32
- Re: [oletrucks] How to change dipstick tube on SB400, G. Simmons, 20:28
- [oletrucks] ICQ Chat, Bruce Michaels, 20:25
- [oletrucks] Water Decals, B&A Kettunen, 20:21
- [oletrucks] Stuck Pistons, Mac Kinghorn, 20:03
- Re: [oletrucks] ICQ Chat, Bruce Michaels, 20:02
- [oletrucks] Steel sweating under heat, B&A Kettunen, 19:53
- Re: [oletrucks] Gas gauge accuracy, Boteler Family, 19:45
- [oletrucks] Play in steering, Charles Culver, 19:31
- [oletrucks] ICQ Chat, Bruce Michaels, 19:18
- Re: [oletrucks] Fram Filter Color, Jerry Charles, 18:44
- Re: [oletrucks] auto trans identity, Don Simmons, 18:24
- [oletrucks] auto trans identity, Claude, 17:35
- Re: [oletrucks] Advice needed (again), Alan D. Gingles, 16:53
- [oletrucks] More on removing VERY stuck pistons, CLLLSLS, 16:50
- [oletrucks] Gas gauge accuracy, Charles Culver, 16:45
- [oletrucks] How to change dipstick tube on SB400, rchansle, 16:20
- Re: [oletrucks] auto trans identity, Jimmy Whitley, 14:35
- Re: [oletrucks] Fram Filter Color, tcape, 14:26
- [oletrucks] tapered front bearing, ADvent, 12:16
- Re: [oletrucks] auto trans identity, ADvent, 12:11
- Re: [oletrucks] Steering arm (drag link) Help!, ADvent, 12:05
- RE: [oletrucks] auto trans identity, Terry Stellman, 11:40
- RE: [oletrucks] Removing windshield glass, Terry Stellman, 11:39
- Re: [oletrucks] Removing VERY stuck pistons, G. Simmons, 11:20
- [oletrucks] Removing windshield glass, Schorn, Tim, 10:45
- [oletrucks] auto trans identity, Don Simmons, 10:42
- Re: FW: [oletrucks] Custom Autosound in AD, tim, 10:41
- Re: [oletrucks] Dimensions of bed wood, rchansle, 10:28
- Re: [oletrucks] Steering arm (drag link) Help!, WR Teto, 10:13
- [oletrucks] Hammerite paint update, WR Teto, 10:08
- Re: [oletrucks] Removing VERY stuck pistons, Jack Halton, 09:51
- Re: [oletrucks] Removing VERY stuck pistons, WR Teto, 09:43
- Re: [oletrucks] Fram Filter Color, Wayne Osborne, 09:02
- RE: [oletrucks] Steering arm (drag link) Help!, Joe Clark, 08:34
- RE: [oletrucks] Steering arm (drag link) Help!, Wayne Osborne, 08:09
- RE: [oletrucks] jacks again, Hanlon, Bill, 07:33
- RE: [oletrucks] Dimensions of bed wood, Nelson, Jeff - DTC, 07:00
- RE: [oletrucks] bed sides, Terry Stellman, 06:55
- Re: [oletrucks] Removing VERY stuck pistons, Grant Galbraith, 06:49
- Fw: [oletrucks] Clutch head drivers, jimamy, 04:22
- Re: [oletrucks] Steering arm (drag link) Help!, Doug Pewterbaugh, 00:37
- Re: [oletrucks] bed sides, Vince Kieffer, 00:05
February 13, 2000
- Re: [oletrucks] Steering arm (drag link) Help!, Doug Pewterbaugh, 23:53
- Re: [oletrucks] Advice needed (again), Passnb4U, 23:48
- Re: [oletrucks] Removing VERY stuck pistons, Passnb4U, 23:45
- [oletrucks] Advice needed (again), Terry S. Glines, 22:34
- FW: [oletrucks] Custom Autosound in AD, Ralph Linnell, 22:20
- [oletrucks] Removing VERY stuck pistons, CLLLSLS, 22:17
- Re: [oletrucks] Steering arm (drag link) Help!, Advdesign1, 20:01
- [oletrucks] needed '52 chevy grill in So.Ca, M.J. Clark, 19:37
- [oletrucks] Kin Pins, J Forbes, 19:35
- Re: [oletrucks] king pins, Grant Galbraith, 19:05
- Re: [oletrucks] bed sides, Bill Bailey, 19:02
- RE: [oletrucks] Steering arm (drag link) Help!, Rich Gallagher, 18:55
- Re: [oletrucks] bed sides, Bruce Damen, 18:46
- Re: [oletrucks] Need outside visor mounting bracket, MKlepp4335, 17:37
- Re: [oletrucks] web site info, David, 17:00
- Re: [oletrucks] king pins, Deve Krehbiel, 16:41
- Re: [oletrucks] king pins, Allen Jones, 16:19
- [oletrucks] bed sides, Justin Hartman, 11:51
- Re:[oletrucks] Water from steel (was originally about POR-15)], WR Teto, 11:35
- [oletrucks] Chatting for Ole Trucks, Gramps, 10:59
- [oletrucks] Fram Filter Color, Deve Krehbiel, 10:57
- Re: [oletrucks] ICQ Chatboundary="------------E83B30D14ACE8F420536879E", Bruce Damen, 10:51
- Re: [oletrucks] king pins, Deve Krehbiel, 10:50
- Re: [Fwd: Re: [oletrucks] Water from steel (was originally about, Gene Davis, 09:45
- Re: [oletrucks] 50 Resto Update, ADvent, 09:36
- Re: [oletrucks] shop update, Wayne Osborne, 07:59
- [oletrucks] king pins, ADvent, 07:59
- Re: [Fwd: Re: [oletrucks] Water from steel (was originally about, Grant Galbraith, 07:00
- Re: [oletrucks] shop update, Passnb4U, 00:33
February 12, 2000
- Re: [Fwd: Re: [oletrucks] Water from steel (was originally about POR-15)], Don Simmons, 23:34
- [oletrucks] shop update, Jimmy Whitley, 21:55
- [oletrucks] 50 Resto Update, Deve Krehbiel, 21:38
- [Fwd: Re: [oletrucks] Water from steel (was originally about POR-15)], Gene Davis, 21:29
- [oletrucks] Trucks in the News, Kyle & Krista, 21:25
- Re: [oletrucks] web site info, joe, 21:17
- Re: [oletrucks]chevy 302 vs. 350, Passnb4U, 21:15
- Re: [oletrucks] jacks again, Passnb4U, 21:05
- [oletrucks] 302 vs 350, J Forbes, 20:56
- Re: [oletrucks] tread width, J Forbes, 20:50
- Re: [oletrucks] Water from steel (was originally about POR-15), G. Simmons, 20:08
- Re: [oletrucks] Steering arm (drag link) Help!, Bruce Michaels, 19:28
- Re: [oletrucks] droopy door handles, ADvent, 19:08
- Re: [oletrucks] Steering arm (drag link) Help!, Advdesign1, 18:43
- [oletrucks] rusty manifolds, Advdesign1, 18:40
- Re: [oletrucks] Water from steel (was originally about POR-15), Advdesign1, 18:37
- Re: [oletrucks] Water from steel (was originally about POR-15), WR Teto, 18:26
- Re: [oletrucks] web site info, WR Teto, 18:21
- Re: [oletrucks] Water from steel (was originally about POR-15), G. Simmons, 17:18
- [oletrucks] ICQ Chat, Bruce Michaels, 16:58
- Re: [oletrucks] jacks again, Eric and Linda St. Phillips, 16:39
- Re: [oletrucks] Dimensions of bed wood, Eric and Linda St. Phillips, 16:35
- [oletrucks] Steering arm (drag link) Help!, Rich Gallagher, 16:35
- Re: [oletrucks]chevy 302 vs. 350, WR Teto, 15:33
- [oletrucks] Water from steel (was originally about POR-15), WR Teto, 15:03
- Re: [oletrucks] chat rm, Gramps, 14:03
- [oletrucks]chevy 302 vs. 350, Brian m, 13:50
- [oletrucks] jacks again, MarkNoakes, 13:30
- Re: [oletrucks] POR 15, MarkNoakes, 13:26
- [oletrucks] 1955 series 2 parts, Bill Franklin, 13:19
- [oletrucks] POR 15, Martin Rosenbaum, 12:39
- [oletrucks] chat rm, Bruce Damen, 12:13
- Re: [oletrucks] A word about POR-15, G. Simmons, 10:51
- [oletrucks] tread width, Claude, 10:36
- Re: [oletrucks] A word about POR-15, Bruce Damen, 10:20
- [oletrucks] web site info, WR Teto, 10:17
- Re: [oletrucks] Dimensions of bed wood, Wayne Osborne, 09:52
- [oletrucks] Dimensions of bed wood, Charles Culver, 09:13
- Re: [oletrucks] A word about POR-15, G. Simmons, 09:06
- Re: [oletrucks] Poor mans POR-15, joe, 08:46
- [oletrucks] new members photo, Wayne Osborne, 08:32
- Re: [oletrucks] Re: Classic Custom Truck Magazine, Wayne Osborne, 07:50
- Re: [oletrucks] a suggestion about trucks..., Jack Halton, 07:47
- [oletrucks] testing, Jimmy Whitley, 07:12
- [oletrucks] test message-ignore, Wayne Osborne, 06:50
- Re: [oletrucks] Poor mans POR-15, WR Teto, 06:47
- Re: [oletrucks] A word about POR-15, Tom Warner, 06:04
- Re: [oletrucks] A word about POR-15, Advdesign1, 05:31
- Re: [oletrucks] a suggestion about trucks..., Advdesign1, 05:26
- [oletrucks] water from steel?, jimamy, 05:18
- Re: [oletrucks] A word about POR-15, Advdesign1, 05:16
- Re: [oletrucks] droopy door handles, Advdesign1, 05:08
- Re: [oletrucks] A word about POR-15, G. Simmons, 03:02
- [oletrucks] Poor mans POR-15, J & M Street, 00:15
February 11, 2000
- RE: [oletrucks] A word about POR-15, Rich Gallagher, 23:54
- Re: [oletrucks] A word about POR-15, Bruce Michaels, 23:44
- Re: [oletrucks] A word about POR-15, CLLLSLS, 22:39
- Re: [oletrucks] A word about POR-15, joe, 21:15
- [oletrucks] Re: Classic Custom Truck Magazine, SHAWN & JO, 21:07
- [oletrucks] a suggestion about trucks..., Joseph Rennie Weertz, 21:02
- [oletrucks] My Recent Gentle Suggestion, Hudson29, 20:45
- Re: [oletrucks] A word about POR-15, joe, 18:59
- [oletrucks] A word about POR-15, Charles Culver, 18:30
- [oletrucks] vacuum wipers, ADvent, 18:16
- [oletrucks] Need outside visor mounting bracket, tcape, 18:07
- Re: [oletrucks] engine interchange compatibility, Grant Galbraith, 18:01
- Re: [oletrucks] leaving?, tcape, 18:01
- [oletrucks] droopy door handles, ADvent, 17:54
- [oletrucks] leaving?, Ron Ramirez, 16:44
- Re: [oletrucks] Re: bolting up a mid 70 suspension, joe, 16:40
- Re: [oletrucks] A Gentle Suggestion, Passnb4U, 15:11
- RE: [oletrucks] A Gentle Suggestion, MIKE RAHL, 14:26
- Re: [oletrucks] A Gentle Suggestion, jelerath, 14:09
- Re: [oletrucks] A Gentle Suggestion, Grant Galbraith, 12:23
- Re: [oletrucks] A Gentle Suggestion, MLayton324, 10:40
- Re: [oletrucks] A Gentle Suggestion, G. Simmons, 10:37
- Re: [oletrucks] A Gentle Suggestion, jelerath, 09:30
- [oletrucks] Swapped an engine out?, Kevin Stewart, 09:19
- [oletrucks] engine interchange compatibility, dph55@pdq.net, 09:14
- [oletrucks] wiring harness, PJMONES, 06:44
February 10, 2000
- Re: [oletrucks] Re: bolting up a mid 70 suspension, Passnb4U, 21:46
- Re: [oletrucks] Cylinder head disassembly, Jack Halton, 21:20
- [oletrucks] Re: bolting up a mid 70 suspension, joe, 21:14
- Re: [oletrucks] A Gentle Suggestion, Deve Krehbiel, 21:06
- Re: [oletrucks] Chevy Duty & heater motor back-orders, REBUS-KNEBUS, 20:41
- Re: [oletrucks] A Gentle Suggestion, Don Simmons, 20:29
- Re: [oletrucks] wiring harness, taobrien, 18:59
- Re: [oletrucks] Chevy Duty & heater motor back-orders, jelerath, 18:23
- [oletrucks] A Gentle Suggestion, Hudson29, 17:19
- Re: [oletrucks] wiring harness, G. Simmons, 16:44
- [oletrucks] Chevy Duty & heater motor back-orders, tim, 16:08
- Re: [oletrucks] IFS (Dakota Digital), Steve Bobst, 15:52
- [oletrucks] brake kit, Dustin Cross, 15:20
- [oletrucks] wiring harness, Dustin Cross, 14:50
- Re: [oletrucks] 46 wheel cylinder, Vince Kieffer, 12:08
- Re: [oletrucks] Cylinder head disassembly, Jack Halton, 11:43
- Re: [oletrucks] 46 wheel cylinder, Allen Jones, 10:22
- [oletrucks] Vin decoder dribble, American Classic, 09:37
- [oletrucks] Re:, Hugh Rode, 09:07
- Re: [oletrucks] 46 wheel cylinder, Passnb4U, 08:51
- Re: [oletrucks] 46 wheel cylinder, Passnb4U, 08:48
- Re: [oletrucks] 46 wheel cylinder, rifeb, 08:35
- [oletrucks] 46 wheel cylinder, Jim House, 08:26
- RE: [oletrucks] IFS, Terry Stellman, 06:11
February 09, 2000
- Re: [oletrucks] RE: (oletrucks) AD Frame, ADvent, 23:20
- Re: [oletrucks] Cylinder head disassembly, Doug Pewterbaugh, 22:35
- Re: [oletrucks] Ad Frame, Vince Kieffer, 22:32
- Re: [oletrucks] Re:, Wayne Osborne, 22:12
- Re: [oletrucks] vin #, Alan D. Gingles, 21:26
- [oletrucks] IFS, Terry S. Glines, 21:21
- [oletrucks] Cylinder head disassembly, Rob Steinmetz, 21:11
- Re: [oletrucks] vin #, Advdesign1, 20:13
- [oletrucks] '95 Lumina / Update, Steven & Sharlyn Rocha, 20:11
- Re: [oletrucks] vin #, Advdesign1, 20:10
- Re: [oletrucks] Ya shoulda see it!, Conrad Vogel, 19:54
- Re: [oletrucks] Ya shoulda see it!, Bill Bailey, 19:46
- Re: [oletrucks] Ya shoulda see it!, Passnb4U, 19:30
- Re: [oletrucks] addresses, G. Simmons, 19:20
- Re: [oletrucks] Repro Gas Tanks, G. Simmons, 19:02
- [oletrucks] Ya shoulda see it!, Alan D. Gingles, 18:46
- Re: [oletrucks] vin #, Alan D. Gingles, 18:37
- [oletrucks] RE: (oletrucks) AD Frame, Bob Keeland, 17:55
- [oletrucks] vin #, Bruce Damen, 17:54
- Re: [oletrucks] 235 oil pressure, Grant Galbraith, 17:08
- [oletrucks] RE: (oletrucks) AD Frame, Bob Keeland, 17:02
- [oletrucks] Repro Gas Tanks, Tayrien, Richard - MIH, 17:00
- Re: [oletrucks] Ad Frame, ADvent, 16:56
- [oletrucks] Re:, william moldenhauer, 16:21
- [oletrucks] addresses, Bruce Damen, 16:05
- RE: [oletrucks] RE: (oletrucks) AD Frame, Nelson, Jeff - DTC, 15:15
- [oletrucks] RE: (oletrucks) AD Frame, Ronald Tofani, 13:36
- [oletrucks] RE: (oletrucks) AD Frame, Bob Keeland, 12:33
- [oletrucks] 235 oil pressure, MLayton324, 11:26
- [oletrucks] Ad Frame, Bob Keeland, 08:37
- Re: [oletrucks] '55 1st series rear?, Paul Blosser, 05:27
- Re: [oletrucks] Speedometer help, Advdesign1, 05:20
- Re: [oletrucks] Off Topic Health Insurance Discussion(Was: Dont do, MRICHAGANG, 05:12
- [oletrucks] Several Questions????, Pastorjon994, 00:20
February 08, 2000
- Re: [oletrucks] IFS ?, J & M Street, 21:34
- Re: [oletrucks] '55 1st series rear?, Doug Pewterbaugh, 21:28
- Re: [oletrucks] IFS Crossmember Clearance?, joe, 20:20
- [oletrucks] RE: parts sharing, Justin Hartman, 16:21
- [oletrucks] 292, J Forbes, 13:13
- Re: [oletrucks] 12 volt coil, Perry Smith, 12:44
- Re: [oletrucks] what's a 292 worth?, G. Simmons, 12:41
- Re: [oletrucks] Dont do this!, Perry Smith, 12:37
- Re: [oletrucks] Brakes 1959 Chevy Viking 6000 2-ton, G. Simmons, 12:37
- Re: [oletrucks] what's a 292 worth?, LandBBall, 12:12
- [oletrucks] spare carrier et al, craig k, 12:02
- [oletrucks] Speedometer help, Knapik, Robert J, 11:06
- [oletrucks] '55 1st series rear?, VIKINGHILL, 10:54
- RE: [oletrucks] Front End Question, ROGER GLEASON, 10:32
- RE: [oletrucks] parts sharing, Jack Halton, 10:23
- Re: [oletrucks] lowered stock suspensions, Joseph Rennie Weertz, 09:42
- [oletrucks] parts sharing, Justin Hartman, 09:42
- Re: [oletrucks] what's a 292 worth?, Jack Halton, 09:09
- [oletrucks] 1959 GMC, Daddyoldman, 08:48
- Re: [oletrucks] what's a 292 worth?, David G Shier, 08:15
- [oletrucks] Daily Digest, rtbros, 07:47
- [oletrucks] 12 volt coil, ADvent, 07:39
- Re: [oletrucks] what's a 292 worth?, Terry White, 07:23
- [oletrucks] Off Topic Health Insurance Discussion(Was: Dont do this!), Nelson, Jeff - DTC, 06:44
- Re: [oletrucks] Front Spring Help, ROGER GLEASON, 06:40
- [oletrucks] Re: Brakes 1959 Chevy Viking 6000 2-ton, Floyd Humphries, 06:23
- Re: [oletrucks] Brakes 1959 Chevy Viking 6000 2-ton, Advdesign1, 05:45
- Re: [oletrucks] Brakes 1959 Chevy Viking 6000 2-ton, Advdesign1, 05:42
- Re: [oletrucks] Spare Tire Carrier, Advdesign1, 05:33
- Re: [oletrucks] Dont do this!, Lewis Osborn, 00:32
- Re: [oletrucks] Dont do this!, Lewis Osborn, 00:24
February 07, 2000
- [oletrucks] Brakes 1959 Chevy Viking 6000 2-ton, Tim Seawolf Self, 23:59
- Re: [oletrucks] Repro Gas Tanks, WR Teto, 23:16
- [oletrucks] IFS ?, Terry S. Glines, 22:43
- Re: [oletrucks] New Truck, ldfinley, 21:51
- Re: [oletrucks] Repro Gas Tanks, ldfinley, 21:43
- [oletrucks] TF Rear End Specifications., Kevin D. Pennell, 21:42
- Re: [oletrucks] Spare Tire Carrier, ldfinley, 21:22
- [oletrucks] lowered stock suspensions, Joseph Rennie Weertz, 21:15
- Re: [oletrucks] auto transmisions, CLLLSLS, 20:55
- [oletrucks] TF Corporate 3/4 & 1-Ton Gears, Kevin D. Pennell, 20:41
- [oletrucks] what's a 292 worth?, CLLLSLS, 20:39
- [oletrucks] Original cast iron look, J Forbes, 20:09
- RE: [oletrucks] Front End Question, Rich Gallagher, 20:05
- Re: [oletrucks] Spare Tire Carrier, EEHodges, 19:49
- [oletrucks] Some days things don't work out right....., Passnb4U, 19:30
- [oletrucks] Front End Question, Deve Krehbiel, 18:46
- [oletrucks] Front Spring Help, dph55@pdq.net, 15:13
- Re: [oletrucks] Front Spring Help Needed, Rich Gallagher, 13:39
- Re: [oletrucks] auto transmisions, Fred Rogers, 13:04
- Re: [oletrucks] looking for a photo of a 41-46 seat bench, Don Simmons, 10:37
- [oletrucks] looking for a photo of a 41-46 seat bench, Jim House, 09:02
- [oletrucks] Front Spring Help Needed, Deve Krehbiel, 08:57
- Re: [oletrucks] Spare Tire Carrier, Joe Clark, 05:52
- Re: [oletrucks] Spare Tire Carrier, Wayne Osborne, 05:12
February 06, 2000
- [oletrucks] test message, Wayne Osborne, 22:03
- [oletrucks] '48 Chevy F/S near San Francisco, Vince Strazzabosco, 21:56
- Re: [oletrucks] Off Topic:'95 Lumina Question, ADvent, 20:47
- Re: [oletrucks] 216 Manifold paint, ADvent, 20:19
- Re: [oletrucks] 216 Manifold paint, Deve Krehbiel, 19:58
- Re: [oletrucks] New Truck, ADvent, 19:36
- [oletrucks] Spare Tire Carrier, Jim House, 19:36
- Re: [oletrucks] New Truck, Alan D. Gingles, 19:18
- [oletrucks] Repro Gas Tanks, Grant Galbraith, 18:59
- Re: [oletrucks] New Truck, william moldenhauer, 18:34
- [oletrucks] New Truck, ADvent, 18:29
- [oletrucks] TF hood question, J Forbes, 17:48
- Re: [oletrucks] 216 Manifold paint, J Forbes, 17:42
- Re: [oletrucks] original jack, dcvjrv, 16:57
- [oletrucks] Spare Tire Carrier, Deve Krehbiel, 16:43
- Re: [oletrucks] Spare Tire Carrier, Bruce Damen, 12:40
- Re: [oletrucks] are front and rear bumpers the same on a 46?, Advdesign1, 11:59
- Re: [oletrucks] 216 Manifold paint, Advdesign1, 11:54
- Re: [oletrucks] TF hood questions, ADvent, 11:52
- Re: [oletrucks] Spare Tire Carrier, Allen Jones, 11:49
- Re: [oletrucks] Spare Tire Carrier, Advdesign1, 11:35
- Re: [oletrucks] original jack, Deve Krehbiel, 11:06
- [oletrucks] Side Tire Mount 49 3100, Floyd Humphries, 04:30
February 05, 2000
- [oletrucks] TF hood questions, J & M Street, 23:32
- [oletrucks] original jack, MarkNoakes, 21:23
- Re: [oletrucks] Spare Tire Carrier, Grant Galbraith, 19:55
- Re: [oletrucks] spare tire carrier, ADvent, 19:54
- [oletrucks] Off Topic:'95 Lumina Question, Steven & Sharlyn Rocha, 19:38
- Re: [oletrucks] Fwd: Fw: Responsibility, ADvent, 19:33
- [oletrucks] 216 Manifold paint, Dinkmcc, 16:31
- Re: [oletrucks] spare tire carrier, Deve Krehbiel, 16:26
- [oletrucks] auto transmisions, VIDEOEIC, 16:09
- Re: [oletrucks] Spare Tire Carrier, Bruce Damen, 16:01
- [oletrucks] Fwd: Fw: Responsibility, MPHUDAK, 16:01
- [oletrucks] spare tire carrier, Bill Porter, 15:25
- Re: [oletrucks] spare tire carrier, tim, 14:40
- [oletrucks] are front and rear bumpers the same on a 46?, Jim House, 14:36
- [oletrucks] spare tire carrier, brad kyle, 12:42
- [oletrucks] spare tire carrier, Bill Porter, 11:20
- RE: [oletrucks] Sheetmetal, Tibbers, 07:24
- Re: [oletrucks] Jacks, David, 06:16
- Re: [oletrucks] Jacks, Jeff Davis, 01:10
February 04, 2000
- [oletrucks] '52 Suburban FS, Antonio R. Tijerino, 23:21
- [oletrucks] Spare Tire Carrier, Deve Krehbiel, 21:24
- RE: [oletrucks] Sheetmetal, Tibbers, 20:58
- RE: [oletrucks] TF Posi Rearend, Hanlon, Bill, 20:56
- [oletrucks] Sheetmetal, W&D, 20:29
- [oletrucks] Interesting note on Ole Trucks and fuel milage, and, Passnb4U, 18:11
- [oletrucks] Myrtle Beach S.C.Show, JWSuther1, 17:50
- [oletrucks] TF Posi Rearend, JWSuther1, 17:17
- Re: [oletrucks] TF original posi trac, J Forbes, 14:42
- Re: [oletrucks] Low Fire on #1, REDEMPTION! AKA Thanks everyone!, Claude, 08:44
- RE: [oletrucks] door locks, Terry Stellman, 07:00
- [oletrucks] Low Fire on #1, REDEMPTION! AKA Thanks everyone!, VIKINGHILL, 06:48
- Re: [oletrucks] steering wheel, dcvjrv, 06:34
- Re: [oletrucks] Indian on the hood, dcvjrv, 06:18
February 03, 2000
- [oletrucks] Low Fire on #1, Mac Kinghorn, 21:40
- Re: [oletrucks] Jack and stand recommendations, tcape, 21:36
- [oletrucks] Valve Adjust, Mac Kinghorn, 21:17
- Re: [oletrucks] GM restoration psrts site found, Jimmy Whitley, 19:46
- Re: [oletrucks] GM restoration psrts site found, Doug Pewterbaugh, 19:28
- Re: [oletrucks] steering wheel, dcvjrv, 19:28
- Re: [oletrucks] GM restoration psrts site found, Doug Pewterbaugh, 19:20
- [oletrucks] GM restoration psrts site found, Doug Pewterbaugh, 19:06
- Re: [oletrucks] what state inspections, tim, 16:23
- Re: [oletrucks] Blue Dot Tailights, william moldenhauer, 15:54
- Re: [oletrucks] TF original posi trac, Passnb4U, 15:07
- Re: [oletrucks] steering wheel, Al & Judy, 14:37
- Re: [oletrucks] steering wheel, ADvent, 14:36
- Re: [oletrucks] TF original posi trac, varanus, 14:03
- [oletrucks] TF original posi trac, JWSuther1, 13:13
- Re: [oletrucks] tire size and RPMs, ROGER GLEASON, 12:42
- Re: [oletrucks] Jacks, Passnb4U, 12:37
- Re: [oletrucks] Jacks, ROGER GLEASON, 12:29
- [oletrucks] steering wheel, MLayton324, 12:13
- Re: [oletrucks] Colorado swap meets? update, rchansle, 12:00
- Re: [oletrucks] Identify This Transmission, J Forbes, 11:03
- RE: [oletrucks] Jacks, Radicic, Gary, 10:38
- Re: [oletrucks] Jacks, ADvent, 10:29
- Re: [oletrucks] Jacks, Doug Pewterbaugh, 10:10
- Re: [oletrucks] Jacks, G. Simmons, 09:57
- Re: [oletrucks] Indian on the hood, David G Shier, 09:41
- Re: [oletrucks] tires and gear ratio, Doug Pewterbaugh, 09:37
- Re: [oletrucks] tire size and RPMs, Allen Jones, 09:28
- Re: [oletrucks] tires and gear ratio(brain fade....), Passnb4U, 09:15
- Re: [oletrucks] tires and gear ratio, Passnb4U, 09:13
- Re: [oletrucks] tires and gear ratio, Passnb4U, 09:10
- [oletrucks] Jacks, Terry S. Glines, 09:06
- Re: [oletrucks] tires and gear ratio, ADvent, 09:06
- Re: [oletrucks] AD headlight question, ADvent, 08:46
- Re: [oletrucks] Jack and stand recommendations, ROGER GLEASON, 08:37
- Re: [oletrucks] what state inspections, ROGER GLEASON, 08:15
- Re: [oletrucks] tire size, Doug Pewterbaugh, 08:04
- Re: [oletrucks] tire size, ROGER GLEASON, 07:49
- [oletrucks] tires and gear ratio, MLayton324, 07:24
- [oletrucks] AD headlight question, Mark Self, 05:33
- Re: [oletrucks] door locks, ADvent, 02:29
- Re: [oletrucks] Identify This Transmission, ADvent, 02:27
February 02, 2000
- Re: [oletrucks] Blue Dot Tailights, STMSymank, 23:07
- Re: [oletrucks] Indian on the hood, Bruce Damen, 22:47
- Re: [oletrucks] Identify This Transmission, Passnb4U, 22:44
- Re: [oletrucks] Blue Dot Tailights, Alan D. Gingles, 22:42
- Re: [oletrucks] tire size, J & M Street, 22:39
- RE: [oletrucks] Jack and stand recommendations, Rich Gallagher, 22:36
- Re: [oletrucks] Gauge Repair & Conversion, Paul Blosser, 22:27
- Re: [oletrucks] 3 speed on the column gu-roo's, Byron Schluter, 22:06
- [oletrucks] Identify This Transmission, Eric Randall, 21:53
- [oletrucks] Identify This Transmission, Banjomike, 21:35
- [oletrucks] Blue Dot Tailights, B&A Kettunen, 21:33
- Re: [oletrucks] '76 Camaro clip job, Byron Schluter, 21:31
- Re: [oletrucks] Indian on the hood, B&A Kettunen, 21:29
- Re: [oletrucks] Jack and stand recommendations, B&A Kettunen, 21:26
- Re: [oletrucks] door locks, G. Simmons, 21:12
- Re: [oletrucks] Points/hei/efi (cool discussion coming!), G. Simmons, 21:07
- Re: [oletrucks] Jack and Stands, ADvent, 20:29
- Re: [oletrucks] Jack and stand recommendations, ADvent, 20:22
- Re: [oletrucks] Tire size vs mpg, ADvent, 20:17
- [oletrucks] Jack and Stands, J Forbes, 19:52
- [oletrucks] door locks, ADvent, 19:48
- Re: [oletrucks] Got a frame!, Andy Johns, 19:43
- [oletrucks] Tire size vs mpg, J Forbes, 19:43
- Re: [oletrucks] Jack and stand recommendations, MarkNoakes, 19:40
- Re: [oletrucks] gas guages, G. Simmons, 19:32
- Re: [oletrucks] Painting small parts, Keith, 19:26
- [oletrucks] Indian on the hood, ADvent, 19:20
- Re: [oletrucks] Points/hei/efi (cool discussion coming!), Jeff Davis, 19:20
- Re: [oletrucks] hey, Bruce Damen, 18:42
- Re: [oletrucks] tire size, ADvent, 18:31
- Re: [oletrucks] tire size, ADvent, 18:28
- [oletrucks] Jack and stand recommendations, Jim House, 18:22
- Re: [oletrucks] hey, ADvent, 18:07
- Re: [oletrucks] Gauge Repair & Conversion, G. Simmons, 17:48
- [oletrucks] Gauge Repair & Conversion, Paul Blosser, 16:12
- Re: [oletrucks] hey, FARMALLM, 15:52
- Re: [oletrucks] Tie Rod ends, ADvent, 14:18
- Re: [oletrucks] Tie Rod ends, ADvent, 14:14
- Re: [oletrucks] Tie Rod ends, Advdesign1, 14:10
- [oletrucks] Muffler Bracket, Nelson, Jeff - DTC, 14:08
- [oletrucks] tire size, MLayton324, 14:06
- Re: [oletrucks] gas guages, Advdesign1, 14:01
- Re: [oletrucks] Tie Rod ends, Doug Pewterbaugh, 13:36
- Re: [oletrucks] tire size, Allen Jones, 13:12
- [oletrucks] Ron Ramirez Only - Apologies to Rest of List, Nelson, Jeff - DTC, 13:10
- Re: [oletrucks] Buzzing Friends?, Jack Halton, 12:56
- [oletrucks] tire size, MLayton324, 12:14
- Re: [oletrucks] gas guages, joe, 11:22
- Re: [oletrucks] Buzzing Friends?, G. Simmons, 10:51
- Re: [oletrucks] gas guages, G. Simmons, 10:45
- Re: [oletrucks] 6v gas gage on 12 volts, G. Simmons, 10:41
- Re: [oletrucks] gas gauges, nateley, 10:14
- Re: [oletrucks] 3 speed on the column gu-roo's, rchansle, 10:02
- Re: [oletrucks] Tie Rod ends, varanus, 09:57
- RE: [oletrucks] gas gauges, American Classic, 09:57
- [oletrucks] Rear-View Mirrors, Turn Signals, Pastorjon994, 09:35
- Re: [oletrucks] Buzzing Friends?, varanus, 09:24
- [oletrucks] gas guages, brad kyle, 09:04
- Re: [oletrucks] Jump starting with a 12 volt, Allen Jones, 08:58
- Re: [oletrucks] 6v gas gage on 12 volts, J Forbes, 08:24
- RE: [oletrucks] 6v gas gage on 12 volts, American Classic, 08:13
- [oletrucks] "848" Head search, Terry White, 08:12
- [oletrucks] 6v gas gage on 12 volts, J Forbes, 07:25
- Re: [oletrucks] Jump starting with a 12 volt, ADvent, 07:11
- [oletrucks] Tie Rod ends, Jim House, 06:20
- Re: [oletrucks] Jump starting with a 12 volt, Grant Galbraith, 06:03
February 01, 2000
- Re: [oletrucks] Painting small parts, G. Simmons, 23:42
- Re: [oletrucks] Jump starting with a 12 volt, ADvent, 23:07
- Re: [oletrucks] Followup: valve adjust, ADvent, 22:50
- Re: [oletrucks] Buzzing Friends?, ADvent, 22:22
- Re: [oletrucks] Painting small parts, David, 22:05
- Re: [oletrucks] Jump starting with a 12 volt, ADvent, 22:01
- Re: [oletrucks] Off-sub HELP, Steve, 21:53
- Re: [oletrucks] Vacuum Wiper Repair, Steve, 21:25
- [oletrucks] Off-sub HELP, SHAWN & JO, 20:51
- Re: [oletrucks] Followup: valve adjust, Lonnie L. Dickey, 20:42
- [oletrucks] Painting small parts, Deve Krehbiel, 20:30
- [oletrucks] Got a frame!, Andy Johns, 20:22
- Re: [oletrucks] hey, Deve Krehbiel, 20:21
- [oletrucks] Honey Comb Radiator Repair, PJMONES, 20:15
- Re: [oletrucks] Swapmeet and Show Listing, joe, 20:05
- RE: [oletrucks] Jump starting with a 12 volt, Jim House, 19:55
- Re: [oletrucks] Buzzing Friends?, Lewis Osborn, 19:55
- Re: [oletrucks] Jump starting with a 12 volt, W&D, 19:28
- Re: [oletrucks] Jump starting with a 12 volt, ADvent, 19:26
- Re: [oletrucks] Jump starting with a 12 volt, Jack Halton, 19:18
- Re: [oletrucks] hey, Durwood B. Darbin, 19:15
- [oletrucks] Vacuum Wiper Repair, Boteler Family, 18:59
- Re: [oletrucks] Jump starting with a 12 volt, Passnb4U, 18:40
- [oletrucks] Jump starting with a 12 volt, Dick Byrne, 18:31
- Re: [oletrucks] To those running the T-5 with the i-6...., G. Simmons, 16:31
- Re: [oletrucks] hey, G. Simmons, 16:29
- [oletrucks] Re: Engine ID help?, Grant Galbraith, 13:23
- Re: [oletrucks] To those running the T-5 with the i-6..(original, Passnb4U, 13:04
- Re: [oletrucks] To those running the T-5 with the i-6...., ADvent, 13:03
- Re: [oletrucks] To those running the T-5 with the i-6...., VIKINGHILL, 11:58
- Re: [oletrucks] To those running the T-5 with the i-6...., G. Simmons, 11:39
- Re: [oletrucks] rewiring job, G. Simmons, 11:34
- Re: [oletrucks] To those running the T-5 with the i-6...., Grant Galbraith, 11:32
- Re: [oletrucks] Low fire on #1 cyl.??? (235 L6), Perry Smith, 11:04
- Re: [oletrucks] rewiring job, Allen Jones, 10:47
- Re: [oletrucks] rewiring job, joe, 10:45
- Re: [oletrucks] rewiring job, joe, 09:43
- [oletrucks] Low fire on #1 cyl.??? (235 L6), J Forbes, 09:39
- Re: [oletrucks] Followup: valve adjust, ADvent, 08:47
- Re: [oletrucks] FW: TRUCK:: My view on transmissions..., ADvent, 08:42
- Re: [oletrucks] To those running the T-5 with the i-6...., ADvent, 08:26
- Re: [oletrucks] To those running the T-5 with the i-6...., ADvent, 08:08
- [oletrucks] rewiring job, Terry and Annette OBrien, 08:01
- [oletrucks] FW: TRUCK:: My view on transmissions..., Terry Stellman, 06:11
- [oletrucks] hey, Bobby Royal, 05:41