On Wed, 18 Jun 1997 19:57:30 EDT mgbob@juno.com (ROBERT G. HOWARD)
writes:
>
>There is a filter in the pump, but you will probably have to remove
>the pump to get at it and not get more crud into the system than you
>remove. You can test the fuel supply by pumping fuel into a container
>held at the carburettor, being careful of spills and the attendant
>fire hazard. There should be a considerable quantity of fuel flowing
>unless the pump/line are clogged. Assuming you have gas there, it may
>
>be nothing more than the fine rust/crud that has built up in the
>filters at the banjo connections or in the float bowls. Remove and
>clean and that problem should go away. I would recommend that you
>install an in-line filter in the line before the carburettors.
>MGBob
|