Have you taken a look at the Tilton system? Check the Jegs or Summit
sites.
Larry Hoy
> -----Original Message-----
> From: owner-mgb-v8@autox.team.net
> [mailto:owner-mgb-v8@autox.team.net] On Behalf Of John Schaner
> Sent: Thursday, May 22, 2003 1:59 PM
> To: mgb-v8@autox.team.net
> Subject: master cylinder clutch master cyl brackets
>
>
> hello to all, i have a modified 58 mga, it has a 2003 firebird 3800
> vy and 5 speed manual trans.
> For braking in the front i am using willwood calipers the rear is a
> narrowed 9 inch ford 12 x 2 1/2 drum brakes 3.50 gears set posi
> with adaptors allowing the use of the wire wheels.
>
> i am using and original twin bore master cylinder for the brake and
> clutch
>
> my understanding is that later model twin cam etc cars has separate
> masters for the clutch and brakes.
>
> does any one who where i can buy the brackets for these master
> cylinders, or have any suggestions?
>
> I would feel more comfortable separating the clutch and brake
> hydraulic circuits
>
> thank you to all
>
> also as i am new to this mailing list, is there a way or a place i
> can look at older post to the list
>
> Thanks
>
> John
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|