They pop off with careful levering. But certainly the front and the back
ones, and possibly the door one, will also have one stud and nut that
obviously has to be undone first. These are right at the front and right at
the back, but on the door could be either in the middle or the front. Look
in the boot/trunk just ahead of the rear light cluster, for example. You
might also like to have a look at
http://www.mgb-stuff.org.uk/wn_bodyframe.htm and click on 'Side Trim'.
----- Original Message -----
From: "robert cox" <packrat3@visi.net>
To: <mgb-v8@autox.team.net>
Sent: Thursday, May 15, 2003 8:15 PM
Subject: (no subject)
> anyone with suggestions on how to remove the chrome side molding strips
> without tearing them up. can't get to allof the rivets with a drill.
///
/// mgb-v8@autox.team.net mailing list
/// Send admin requests to majordomo@autox.team.net
/// Send list postings to mgb-v8@autox.team.net
/// Edit your replies! If they include this trailer, they will NOT be sent.
///
|