--===============1382111502481419627==
--0000000000003cc30c05a3ffa7b7
Content-Transfer-Encoding: quoted-printable
When the US flirted with metrifying and production when to canada and
mexico they made standard threaded bolts with metric heads so factories
there could use metric tools
Ira Erbs
Portland,OR
59 BN4
67MGB
65 AH Sprite
phone makes it's own choices. Forgive typos
On Thu, Apr 23, 2020, 6:17 PM WILLIAM B LAWRENCE <ynotink@msn.com> wrote:
> I think you have it backwards. The original GM design would have used the
> UNC thread pattern with a 9/16=E2=80=9D bolt head. The design predated
> metrification in the US by a few decades. When Rover went metric, sometim=
e
> in the 80s probably, they retained the US standard thread pattern while
> changing to a metric standard bolt head. It would probably have been more
> costly to retool the engine castings to switch to a metric thread pattern=
.
>
> Bill Lawrence
> BN1 #554
> ------------------------------
> *From:* i erbs <eyera3000@gmail.com>
> *Sent:* Thursday, April 23, 2020 7:13 PM
> *To:* WILLIAM B LAWRENCE <ynotink@msn.com>
> *Cc:* simon.lachlan@alexarevel.plus.com <simon.lachlan@alexarevel.plus.co=
m>;
> Patrick & Caroline Quinn <p_cquinn@tpg.com.au>; Healeys <
> healeys@autox.team.net>
> *Subject:* Re: [Healeys] Today's Rant
>
> Gm did that to rationalize tools as you say, but save money on not
> converting thread and pitch to metric. I had a 87 Olds with that exact
> situation. But also standards bolts heads too in some areas.
>
> Ira Erbs
> Portland,OR
> 59 BN4
> 67MGB
> 65 AH Sprite
> phone makes it's own choices. Forgive typos
>
> On Thu, Apr 23, 2020, 11:39 AM WILLIAM B LAWRENCE <ynotink@msn.com> wrote=
:
>
> In the midst of my recent Rover V8 rebuild I was surprised to discover
> that while all of the fasteners used metric wrench sizes many in the shor=
t
> block used the UNC thread type ie: a 3/8" coarse bolt with a 13 mm head. =
I
> assume that Rover simply continued the UNC pattern of the original GM
> castings and changed the head size to simplify tool inventory.
>
> Bill Lawrence
> BN1 #554
> ------------------------------
> *From:* Healeys <healeys-bounces@autox.team.net> on behalf of
> simon.lachlan@alexarevel.plus.com <simon.lachlan@alexarevel.plus.com>
> *Sent:* Thursday, April 23, 2020 12:20 AM
> *To:* 'Patrick & Caroline Quinn' <p_cquinn@tpg.com.au>
> *Cc:* 'Healeys' <healeys@autox.team.net>
> *Subject:* Re: [Healeys] Today's Rant
>
>
> I have a vague memory of what we called =E2=80=9CTransitional Rovers=E2=
=80=9D ie a mix of
> Imperial and Metric. All =C2=BE tonner long wheel-base. All UK based. The=
y may
> have been peculiar to the army.
>
> Glad I wasn=E2=80=99t in REME=E2=80=A6..they had to maintain them.
>
> Simon
>
>
>
> *From:* Healeys <healeys-bounces@autox.team.net> *On Behalf Of *Patrick &
> Caroline Quinn
> *Sent:* 23 April 2020 00:23
> *To:* 'David Nock' <healeydoc@gmail.com>; 'Michael MacLean' <
> rrengineer.mike@att.net>
> *Cc:* 'Healeys' <healeys@autox.team.net>
> *Subject:* Re: [Healeys] Today's Rant
>
>
>
> G=E2=80=99day
>
>
>
> Not long after I bought my first 100 back in 1972 I turned 21 and one of
> the birthday gifts I received was a set of BSF spanners and sockets. I
> still have them.
>
>
>
> Now I have three sets of tools. BSF for the Healey Saloon. AF for the 100
> BN3 and metric for the Hilux, Mercedes and around the house. There are ma=
ny
> variations of each for specific purposes.
>
>
>
> Hoo Roo
>
>
>
> Patrick Quinn
>
> Blue Mountains, Australia
>
>
>
> *From:* Healeys [mailto:healeys-bounces@autox.team.net
> <healeys-bounces@autox.team.net>] *On Behalf Of *David Nock
> *Sent:* Wednesday, 22 April 2020 11:59 PM
> *To:* Michael MacLean
> *Cc:* Healeys
> *Subject:* Re: [Healeys] Today's Rant
>
>
>
> All the threads on the 100/4 engine are BSF not Whitworth. Whitworth is =
a
> coarse thread.
>
> However the wrench sizes are interchangeable. They are one size apart fro=
m
> each other.
>
>
>
> The threads on the small plate are 1/4 bsf and the gen bracket is 5/16
> bsf. Also look close there are some of the studs that go thru into the
> cooling system.
>
> David Nock
>
>
>
> Sent from my iPhone
>
>
>
> On Apr 21, 2020, at 10:18 PM, Michael MacLean <rrengineer.mike@att.net>
> wrote:
>
> =EF=BB=BF
>
> So, I am getting ready to install the head on my 100 short block. Made
> sure all the intake valves have the new seals I bought from British Car
> Specialists plus the new set of springs I already had for the valves. Th=
e
> two mating surfaces were cleaned with a white (finest grit) Roloc brush. =
I
> have the correct head gasket (copper faced). Tonight was the night to
> torque the head down to the block. My surprise, for some stupid reason I
> only ordered 8 new head nuts. I managed to order the correct amount of
> washer for the head. No idea what my pea brain was thinking. Also found
> out the head nuts are Whitworth (3/8") size. I have a Whitworth socket
> set, so tragedy averted there. I seem to remember someone talking about
> the water jacket blanking plate earlier this week. That made me look at
> the front of my block. Three studs and an empty hole. No cover. I
> managed to find two blanking covers in my stash of parts and a gasket in =
my
> gasket set. Woohoo, but no nuts or lock washers. Can someone tell me if
> these little nuts that I do not have are Whitworth nuts. If so, what
> size? I have a generator bracket, but there are no threaded studs for th=
e
> block or nuts to mount it with. Once again, Whitworth? The closer I get
> to putting this together the more stuff I find out I don't have.
>
> Mike MacLean
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com
>
>
>
>
> <https://www.avast.com/sig-email?utm_medium=3Demail&utm_source=3Dlink&utm=
_campaign=3Dsig-email&utm_content=3Demailclient>
>
> Virus-free. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=3Demail&utm_source=3Dlink&utm=
_campaign=3Dsig-email&utm_content=3Demailclient>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
--0000000000003cc30c05a3ffa7b7
Content-Transfer-Encoding: quoted-printable
<div dir=3D"auto">When the US flirted with metrifying and production when t=
o canada and mexico they made standard threaded bolts with metric heads so =
factories there could use metric tools<br><br><div data-smartmail=3D"gmail_=
signature">Ira Erbs<br>Portland,OR<br>59 BN4<br>67MGB<br>65 AH Sprite<br>ph=
one makes it's own choices. Forgive typos</div></div><br><div class=3D"=
gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">On Thu, Apr 23, 2020, 6:=
17 PM WILLIAM B LAWRENCE <<a href=3D"mailto:ynotink@msn.com";>ynotink@msn=
.com</a>> wrote:<br></div><blockquote class=3D"gmail_quote" style=3D"mar=
gin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<div>I think you have it backwards. The original GM design would have used =
the UNC thread pattern with a 9/16=E2=80=9D bolt head. The design predated =
metrification in the US by a few decades. When Rover went metric, sometime =
in the 80s probably, they retained the US
standard thread pattern while changing to a metric standard bolt head. It =
would probably have been more costly to retool the engine castings to switc=
h to a metric thread pattern.</div>
<div><br>
</div>
<div>Bill Lawrence=C2=A0</div>
<div>BN1 #554</div>
<hr style=3D"display:inline-block;width:98%">
<div id=3D"m_6037447791772944075divRplyFwdMsg" dir=3D"ltr"><font face=3D"Ca=
libri, sans-serif" style=3D"font-size:11pt" color=3D"#000000"><b>From:</b> =
i erbs <<a href=3D"mailto:eyera3000@gmail.com"; target=3D"_blank" rel=3D"=
noreferrer">eyera3000@gmail.com</a>><br>
<b>Sent:</b> Thursday, April 23, 2020 7:13 PM<br>
<b>To:</b> WILLIAM B LAWRENCE <<a href=3D"mailto:ynotink@msn.com"; target=
=3D"_blank" rel=3D"noreferrer">ynotink@msn.com</a>><br>
<b>Cc:</b> <a href=3D"mailto:simon.lachlan@alexarevel.plus.com"; target=3D"_=
blank" rel=3D"noreferrer">simon.lachlan@alexarevel.plus.com</a> <<a href=
=3D"mailto:simon.lachlan@alexarevel.plus.com"; target=3D"_blank" rel=3D"nore=
ferrer">simon.lachlan@alexarevel.plus.com</a>>; Patrick & Caroline Q=
uinn <<a href=3D"mailto:p_cquinn@tpg.com.au"; target=3D"_blank" rel=3D"no=
referrer">p_cquinn@tpg.com.au</a>>; Healeys <<a href=3D"mailto:healey=
s@autox.team.net" target=3D"_blank" rel=3D"noreferrer">healeys@autox.team.n=
et</a>><br>
<b>Subject:</b> Re: [Healeys] Today's Rant</font>
<div>=C2=A0</div>
</div>
<div>
<div dir=3D"auto">Gm did that to rationalize tools as you say, but save mon=
ey on not converting thread and pitch to metric. I had a 87 Olds with that =
exact situation. But also standards bolts heads too in some areas.=C2=A0<br=
>
<br>
<div>Ira Erbs<br>
Portland,OR<br>
59 BN4<br>
67MGB<br>
65 AH Sprite<br>
phone makes it's own choices. Forgive typos</div>
</div>
<br>
<div>
<div dir=3D"ltr">On Thu, Apr 23, 2020, 11:39 AM WILLIAM B LAWRENCE <<a h=
ref=3D"mailto:ynotink@msn.com"; target=3D"_blank" rel=3D"noreferrer">ynotink=
@msn.com</a>> wrote:<br>
</div>
<blockquote style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-l=
eft:1ex">
<div dir=3D"ltr">
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
In the midst of my recent Rover V8 rebuild I was surprised to discover that=
while all of the fasteners used metric wrench sizes many in the short bloc=
k used the UNC thread type ie: a 3/8" coarse bolt with a 13 mm head. I=
assume that Rover simply continued the
UNC pattern of the original GM castings and changed the head size to simpl=
ify tool inventory.</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
<br>
</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
Bill Lawrence</div>
<div style=3D"font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color=
:rgb(0,0,0)">
BN1 #554</div>
<div id=3D"m_6037447791772944075x_m_2173325284267159273appendonsend"></div>
<hr style=3D"display:inline-block;width:98%">
<div id=3D"m_6037447791772944075x_m_2173325284267159273divRplyFwdMsg" dir=
=3D"ltr"><font face=3D"Calibri, sans-serif" color=3D"#000000" style=3D"font=
-size:11pt"><b>From:</b> Healeys <<a href=3D"mailto:healeys-bounces@auto=
x.team.net" rel=3D"noreferrer noreferrer" target=3D"_blank">healeys-bounces=
@autox.team.net</a>>
on behalf of <a href=3D"mailto:simon.lachlan@alexarevel.plus.com"; rel=3D"n=
oreferrer noreferrer" target=3D"_blank">
simon.lachlan@alexarevel.plus.com</a> <<a href=3D"mailto:simon.lachlan@a=
lexarevel.plus.com" rel=3D"noreferrer noreferrer" target=3D"_blank">simon.l=
achlan@alexarevel.plus.com</a>><br>
<b>Sent:</b> Thursday, April 23, 2020 12:20 AM<br>
<b>To:</b> 'Patrick & Caroline Quinn' <<a href=3D"mailto:p_c=
quinn@tpg.com.au" rel=3D"noreferrer noreferrer" target=3D"_blank">p_cquinn@=
tpg.com.au</a>><br>
<b>Cc:</b> 'Healeys' <<a href=3D"mailto:healeys@autox.team.net"; =
rel=3D"noreferrer noreferrer" target=3D"_blank">healeys@autox.team.net</a>&=
gt;<br>
<b>Subject:</b> Re: [Healeys] Today's Rant</font>
<div>=C2=A0</div>
</div>
<div lang=3D"EN-GB">
<div>
<p><span style=3D"font-size:11.0pt;font-family:"Calibri",sans-ser=
if">I have a vague memory of what we called =E2=80=9CTransitional Rovers=E2=
=80=9D ie a mix of Imperial and Metric. All
</span><span style=3D"font-size:11.0pt;font-family:"Calibri",sans=
-serif">=C2=BE</span><span style=3D"font-size:11.0pt;font-family:"Cali=
bri",sans-serif"> tonner long wheel-base. All UK based. They may have =
been peculiar to the army.</span></p>
<p><span style=3D"font-size:11.0pt;font-family:"Calibri",sans-ser=
if">Glad I wasn=E2=80=99t in REME=E2=80=A6..they had to maintain them.</spa=
n></p>
<p><span style=3D"font-size:11.0pt;font-family:"Calibri",sans-ser=
if">Simon</span></p>
<p><span style=3D"font-size:11.0pt;font-family:"Calibri",sans-ser=
if">=C2=A0</span></p>
<div>
<div style=3D"border:none;border-top:solid #e1e1e1 1.0pt;padding:3.0pt 0cm =
0cm 0cm">
<p><b><span lang=3D"EN-US" style=3D"font-size:11.0pt;font-family:"Cali=
bri",sans-serif">From:</span></b><span lang=3D"EN-US" style=3D"font-si=
ze:11.0pt;font-family:"Calibri",sans-serif"> Healeys <<a href=
=3D"mailto:healeys-bounces@autox.team.net"; rel=3D"noreferrer noreferrer" ta=
rget=3D"_blank">healeys-bounces@autox.team.net</a>>
<b>On Behalf Of </b>Patrick & Caroline Quinn<br>
<b>Sent:</b> 23 April 2020 00:23<br>
<b>To:</b> 'David Nock' <<a href=3D"mailto:healeydoc@gmail.com"; =
rel=3D"noreferrer noreferrer" target=3D"_blank">healeydoc@gmail.com</a>>=
; 'Michael MacLean' <<a href=3D"mailto:rrengineer.mike@att.net"; =
rel=3D"noreferrer noreferrer" target=3D"_blank">rrengineer.mike@att.net</a>=
><br>
<b>Cc:</b> 'Healeys' <<a href=3D"mailto:healeys@autox.team.net"; =
rel=3D"noreferrer noreferrer" target=3D"_blank">healeys@autox.team.net</a>&=
gt;<br>
<b>Subject:</b> Re: [Healeys] Today's Rant</span></p>
</div>
</div>
<p>=C2=A0</p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">G=E2=80=99day</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">=C2=A0</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">Not long after I bought =
my first 100 back in 1972 I turned 21 and one of the birthday gifts I recei=
ved was a set of BSF spanners and sockets. I still have them.</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">=C2=A0</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">Now I have three sets of=
tools. BSF for the Healey Saloon. AF for the 100 BN3 and metric for the Hi=
lux, Mercedes and around the house. There are many variations of each for s=
pecific purposes.</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">=C2=A0</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">Hoo Roo</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">=C2=A0</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">Patrick Quinn</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">Blue Mountains, Australi=
a</span></p>
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt">=C2=A0</span></p>
<div>
<div style=3D"border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0cm =
0cm 0cm">
<p><b><span lang=3D"EN-US" style=3D"font-size:10.0pt;font-family:"Taho=
ma",sans-serif">From:</span></b><span lang=3D"EN-US" style=3D"font-siz=
e:10.0pt;font-family:"Tahoma",sans-serif"> Healeys [<a href=3D"ma=
ilto:healeys-bounces@autox.team.net" rel=3D"noreferrer noreferrer" target=
=3D"_blank">mailto:healeys-bounces@autox.team.net</a>]
<b>On Behalf Of </b>David Nock<br>
<b>Sent:</b> Wednesday, 22 April 2020 11:59 PM<br>
<b>To:</b> Michael MacLean<br>
<b>Cc:</b> Healeys<br>
<b>Subject:</b> Re: [Healeys] Today's Rant</span></p>
</div>
</div>
<p><span lang=3D"EN-AU">=C2=A0</span></p>
<p><span lang=3D"EN-AU">All the threads on the 100/4 engine are BSF not Whi=
tworth.=C2=A0 Whitworth is a coarse thread.=C2=A0</span></p>
<div>
<p><span lang=3D"EN-AU">However the wrench sizes are interchangeable. They =
are one size apart from each other.=C2=A0</span></p>
</div>
<div>
<p><span lang=3D"EN-AU">=C2=A0</span></p>
</div>
<div>
<p style=3D"margin-bottom:12.0pt"><span lang=3D"EN-AU">The threads on the s=
mall plate are 1/4 bsf and the gen bracket is 5/16 bsf. Also look close the=
re are some of the studs that go thru into the cooling system.=C2=A0</span>=
</p>
<div>
<div>
<p><span lang=3D"EN-AU">David Nock</span></p>
</div>
<div>
<p><span lang=3D"EN-AU">=C2=A0</span></p>
</div>
<p><span lang=3D"EN-AU">Sent from my iPhone</span></p>
</div>
<div>
<p style=3D"margin-bottom:12.0pt"><span lang=3D"EN-AU">=C2=A0</span></p>
<p style=3D"margin-bottom:12.0pt"><span lang=3D"EN-AU">On Apr 21, 2020, at =
10:18 PM, Michael MacLean <<a href=3D"mailto:rrengineer.mike@att.net"; re=
l=3D"noreferrer noreferrer" target=3D"_blank">rrengineer.mike@att.net</a>&g=
t; wrote:</span></p>
</div>
<blockquote style=3D"margin-top:5.0pt;margin-bottom:5.0pt">
<div>
<p><span lang=3D"EN-AU" style=3D"font-family:"Tahoma",sans-serif"=
>=EF=BB=BF</span><span lang=3D"EN-AU"></span></p>
<div>
<div>
<p><span lang=3D"EN-AU">So, I am getting ready to install the head on my 10=
0 short block.=C2=A0 Made sure all the intake valves have the new seals I b=
ought from British Car Specialists plus the new set of springs I already ha=
d for the valves.=C2=A0 The two mating surfaces
were cleaned with a white (finest grit) Roloc brush.=C2=A0 I have the corr=
ect head gasket (copper faced). =C2=A0 Tonight was the night to torque the =
head down to the block.=C2=A0 My surprise, for some stupid reason I only or=
dered 8 new head nuts.=C2=A0 I managed to order the
correct amount of washer for the head.=C2=A0 No idea what my pea brain was=
thinking.=C2=A0 Also found out the head nuts are Whitworth (3/8")=C2=
=A0 size.=C2=A0 I have a Whitworth socket set, so tragedy averted there.=C2=
=A0 I seem to remember someone talking about the water jacket blanking
plate earlier this week.=C2=A0 That made me look at the front of my block.=
=C2=A0 Three studs and an empty hole.=C2=A0 No cover.=C2=A0 I managed to fi=
nd two blanking covers in my stash of parts and a gasket in my gasket set.=
=C2=A0 Woohoo, but no nuts or lock washers.=C2=A0 Can someone tell
me if these little nuts that I do not have are Whitworth nuts.=C2=A0 If so=
, what size?=C2=A0 I have a generator bracket, but there are no threaded st=
uds for the block or nuts to mount it with.=C2=A0 Once again, Whitworth?=C2=
=A0 The closer I get to putting this together the more
stuff I find out I don't have.</span></p>
</div>
<div>
<p><span lang=3D"EN-AU">Mike MacLean</span></p>
</div>
</div>
<p style=3D"margin-bottom:12.0pt"><span lang=3D"EN-AU">____________________=
___________________________<br>
rer noreferrer" target=3D"_blank">
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">
http://www.team.net/pipermail/healeys</a> <a href=3D"http://autox.team.net/=
archive" rel=3D"noreferrer noreferrer" target=3D"_blank">
http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; rel=3D"noreferrer noreferrer" tar=
get=3D"_blank">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r noreferrer" target=3D"_blank">http://autox.team.net/mailman/listinfo/heal=
eys</a><br>
<br>
s/healeydoc@gmail.com" rel=3D"noreferrer noreferrer" target=3D"_blank">
http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com</a></span=
></p>
</div>
</blockquote>
</div>
<div id=3D"m_6037447791772944075x_m_2173325284267159273x_DAB4FAD8-2DD7-40BB=
-A1B8-4E2AA1F9FDF2">
<p><span lang=3D"EN-AU" style=3D"font-size:11.0pt;font-family:"Calibri=
",sans-serif">=C2=A0</span></p>
<table border=3D"1" cellspacing=3D"3" cellpadding=3D"0" style=3D"border:non=
e;border-top:solid #d3d4de 1.0pt">
<tbody>
<tr>
<td width=3D"55" style=3D"width:41.25pt;border:none;padding:9.75pt .75pt .7=
5pt .75pt">
<p><a href=3D"https://www.avast.com/sig-email?utm_medium=3Demail&utm_so=
urce=3Dlink&utm_campaign=3Dsig-email&utm_content=3Demailclient" rel=
=3D"noreferrer noreferrer" target=3D"_blank"><span style=3D"font-size:11.0p=
t;font-family:"Calibri",sans-serif;text-decoration:none"><img bor=
der=3D"0" width=3D"46" height=3D"29" id=3D"m_6037447791772944075x_m_2173325=
284267159273x__x0000_i1025" style=3D"width:.4791in;height:.3055in" src=3D"h=
ttps://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animat=
ed-no-repeat-v1.gif"></span></a><span style=3D"font-size:11.0pt;font-family=
:"Calibri",sans-serif"></span></p>
</td>
<td width=3D"470" style=3D"width:352.5pt;border:none;padding:9.0pt .75pt .7=
5pt .75pt">
<p style=3D"line-height:13.5pt"><span style=3D"font-size:10.0pt;font-family=
:"Arial",sans-serif;color:#41424e">Virus-free.
<a href=3D"https://www.avast.com/sig-email?utm_medium=3Demail&utm_sourc=
e=3Dlink&utm_campaign=3Dsig-email&utm_content=3Demailclient" rel=3D=
"noreferrer noreferrer" target=3D"_blank">
<span style=3D"color:#4453ea">www.avast.com</span></a> </span></p>
</td>
</tr>
</tbody>
</table>
<p><span style=3D"font-size:11.0pt;font-family:"Calibri",sans-ser=
if">=C2=A0</span></p>
</div>
</div>
</div>
</div>
_______________________________________________<br>
rer noreferrer noreferrer" target=3D"_blank">
<br>
Archive: <a href=3D"http://www.team.net/pipermail/healeys"; rel=3D"noreferre=
r noreferrer noreferrer" target=3D"_blank">
http://www.team.net/pipermail/healeys</a> <a href=3D"http://autox.team.net/=
archive" rel=3D"noreferrer noreferrer noreferrer" target=3D"_blank">
http://autox.team.net/archive</a><br>
<br>
<a href=3D"mailto:Healeys@autox.team.net"; rel=3D"noreferrer noreferrer" tar=
get=3D"_blank">Healeys@autox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/healeys"; rel=3D"noreferre=
r noreferrer noreferrer" target=3D"_blank">http://autox.team.net/mailman/li=
stinfo/healeys</a><br>
<br>
s/eyera3000@gmail.com" rel=3D"noreferrer noreferrer noreferrer" target=3D"_=
blank">
http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com</a><br>
<br>
</blockquote>
</div>
</div>
</div>
</blockquote></div>
--0000000000003cc30c05a3ffa7b7--
--===============1382111502481419627==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--===============1382111502481419627==--
|