healeys
[Top] [All Lists]

[Healeys] Chassis seams

Subject: [Healeys] Chassis seams
From: jmsdarch at sbcglobal.net (John Spaur)
Date: Mon, 5 Mar 2018 19:02:04 -0800
References: <003601d3b4ca$338bf4c0$9aa3de40$@homecall.co.uk>
It's a seam weld.

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of
simon.lachlan at homecall.co.uk
Sent: Monday, March 5, 2018 1:38 PM
To: 'Healey List' <healeys at autox.team.net>
Subject: [Healeys] Chassis seams

 

Another question tonight..

Some time soonish I'm having a plate welded to the front cross-member of my
MkII's chassis. (For jacking). I grovel under the car, as best I can, and I
wonder about the seam running down the centre of the chassis members...they
bulge(?) downward/outwards. And that, presumably, will hinder getting the
plate on nice and flat.

Now, is that seam a hollow bulge which, if ground off flush, would cause the
cross-member to split? Or, is the seam a weld? ie the chassis is two
U-sections welded together, top and bottom..So, a bit of judicious grinding
wouldn't hurt.

If you see what I mean.?

Simon

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20180305/7ffc8b6c/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>