Have you tried bleeding it?
Sent from my iPhone
> On May 27, 2023, at 11:16 AM, McKearn McKearn via Fot <fot@autox.team.net>
> wrote:
>
> 
> Hi all.
> Got the GT6 out a few days ago and remembered that I was going to fix the
> clutch problem I had last fall before I stored it away but did'nt ..
> So long story short, I don't know if it's the slave cyl or master cylinder
> but it works fine at first few shifts but as you drive it you get less and
> less clutch movement.
> Seems like if you let it set a while it will work again..
> Any ideas?
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|