fot
[Top] [All Lists]

[Fot] Temperary Numbers

Subject: [Fot] Temperary Numbers
From: billdentin at aol.com (Bill Dentinger)
Date: Thu, 7 Jun 2018 13:03:03 -0400
References: <BLUPR19MB0355F7AD307B841AD540AAE9BA640@BLUPR19MB0355.namprd19.prod.outlook.com>
Marty...

A further comment on using your wife's shelving paper as stock for making race 
car number changes at an event.  

Obviously the stuff comes in a roll so the pressure sensitive adhesive side has 
a cover layer in place until you go to use it.  You use that side to sketch the 
number you want (usually a '1').  No so important for the numeral '1', but 
critical for most of the others...to remember to sketch it 'backwards' because 
when you cut it out it is the front side that will display.  History tells us 
GROUP 44 learned this lesson when they cut numbers in a hurry at an event.  
They neglected to draw the numbers backwards.  The way I understand it...that 
error actually became their trademark, and the basis for their 'backwards' 
logo.  Hooray for GROUP 44.  Everyone loves self depreciation humor, which, of 
course, comes easy for me.

Bill Dentinger 



-----Original Message-----
From: marty via Fot <fot at autox.team.net>
To: FOT <fot at autox.team.net>
Sent: Thu, Jun 7, 2018 1:24 am
Subject: [Fot] Temperary Numbers



When you folks have to modify your number for an event what are you using that 
doesn't make a mess of things when you take it off? Duct tape, electrical tape, 
other?


Thanks,


Marty

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/pipermail/fot



-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/fot/attachments/20180607/eb79fa26/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>