I don't know the specific differences but they do carry different part
numbers. The late Spit uprights are PN GSJ265 and 266, while the GT6 PNs
are GSJ264 and 267. The differences may be just in the finished pieces and
the Spit ones may be upgradeable.
Joe
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Enquiries Road & Track
Sent: Friday, May 27, 2011 2:21 PM
To: fot@autox.team.net
Subject: [Fot] spitfire vs GT6 front upright
can anyone confirm if the taper machined into in the late model front
upright (ie the type without a "hole" for the steering arm), is the same GT6
and Spitfire.???> The Gt6 uses bigger bearings and a bigger stub axle to
match, and i think, a different taper. would like 100% confirmation if
possible
Terry
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/spitlist@cox.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|