I'm installing a dual circuit setup in my TR4, and based on a vendor
suggestion I bought a 10# restrictor valve for the drums. However,
after browsing the archives it appears that I shudda bought a restrictor
for the disks. Damn, another backtrack. Is a restrictor for the disks
warranted, instead of the drums? If so, I assume a 2# unit would be the
correct size?
TIA
jim
--
Jim Hassall
Blacksburg VA
'63 TR4 in autox preparation
99% finished, 90% to go
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|