More on the panel fitting - the frame (chassis) is quite flexable. Leave
the doors on as a guide for any fitting of panels. The car should be
RESTING ON THE SUSPENSION for this or is will bend to a different shape
after coming off he stands.
Evem more important the ENGINE MUST BE in place in the bay. THat's a big
lump of iron and it really bends the front end on the 6s.
Any work on the engine, the carbs, even the wiring and the air ducts,
should be done BEFORE replacing the aluminum shroud. It's a very small
opening for the bonnet and the itting of the air cleaners is a task once
the upper body work is in place.
-------------
That's is for moi for this year . Have a good Xmas and "see" you all in
the New Year !
Christopher
|