> From: Roland Dudley <decwrl!decvax!mit-eddie!dtc.hp.com!cobra>
>
> Some of you on the b-c list have already heard the story about my pet
> rabbit chewing up the flexible rubber line to my front disc calipers [...]
Don't know how I could have missed that! ;-)
> [...]
> Much to my horror, I discovered that the bolts which attach the master
> cylinder to the firewall aren't standard SAE. [...]
> I measured the widths of the heads of two bolts I need wrenches
> for and got the following: .531" and .624". The first one is somewhere
> between an SAE 1/2 and 9/16" [...]
0.531" is 17/32nds. What's non-standard about that? ;-)
> The second one is a bit under 5/8".
Not really. 5/8" is 0.625", so a standard" 5/8" spanner should suffice.
> Thanks for your help,
>
> Roland Dudley
> cobra@hpcilsn.HP.COM
Don't know that it was helpful, but You're Welcome!
Pat Vilbrandt John Fluke Mfg. Co., Inc. Everett, Washington USA
UUCP: pwv@tc.fluke.COM or: { uunet uw-beaver, sun, microsoft }!fluke!pwv
ARPA: fluke!pwv@uw-beaver.ARPA
|