bricklin
[Top] [All Lists]

Re: AOD conversion

To: "bricklin" <Bricklin@autox.team.net>
Subject: Re: AOD conversion
From: "Peter Hermann" <hermann@muenster.de>
Date: Thu, 9 Nov 2000 19:03:11 +0100
Iīm planning the same modifications and bought the AOD xmission and rear
axle. I havenīt build them in yet. But the xmission seems to have the same
housing. It should bolt right in. I will install another shifter (heavy
duty), therefore I didnīt think a lot about the shifter bezel.
Exchanging the axle seems to be more work to me. I got one from a Ford
Versaille. But since that car used coil springs there have to be done some
modifications at it.

Peter
#2041


----- Original Message -----
From: alphachi <alphachi@writeme.com>
To: <Bricklin@autox.team.net>
Sent: Thursday, November 09, 2000 8:11 AM
Subject: AOD conversion


> Ok, I'm really considering installing an AOD tranny in my 75 B auto.  The
> 3000 rpm at cruising speed is really annoying and gas guzzling.  I would
> really like to hear from anyone who has actually performed this
modification
> to understand what exactly is involved, such as any modifications to
mounts,
> drive shaft, etc., how do I get the AOD to function with a Holley Carb,
and
> finally, what about the shift bezel that is set up for a 3 speed.   I
would
> like to perform this with as little modification as possible to the B and
> with an option to later install a posi 9" rear with disc brakes, but for
> now, just the tranny will do fine.
>
> Thanks a whole bunch in advance
>
> stephan #2821
>



<Prev in Thread] Current Thread [Next in Thread>