Ouch!
I will *NOT* be trying method of tuning in my 1.8t Passat.
However, I might try out the 200+hp GIAC chip the previous owner
included with the car on you STS guys :)
-Todd
STS #42
PS: A baby boy has arrived, and Darth Rabbit has Sold!
Tibbals, Paul wrote:
> Paul S posted:
> From: Paul Stubbs
> Subject: Some new Audi modification methods
>
> I was going to give this a try, does anyone have any experience with or
> think it might be worthwhile? Can I still run in Stock considering I am
> not
> removing or adding any parts?
>
> http://forums.audiworld.com/a4/msgs/1567770.phtml
>
> Regards,
> Paul :)
> Paul,
> BWAHAHAHA. Apropos given the recent talk of Stock "mods" that result in
>degradation! :-) And it appears that some folks took the bait.
>
> Of course, it's (at least intended to) be the equivalent of polishing and/or
>porting so would NOT be allowable. They don't even allow extrude honing until
>you get to Street Prepared... Now, if you just take your intake manifold off,
>pour a cup of sand into it, put your hands over the ports, and dance around
>the room with it shaking it wildly (the manifold!), nobody will be the wiser
>except whoever has to do the vacuuming. Don't worry about the dust, it'll go
>right through the engine.
> PaulT
|