10 minutes! Wish it were that simple on my Integra! Takes about 6 times
as long as that by the time you unbolt the cat to the header, shift
linkages, etc, etc.
just put my Mugen sway on the front yesterday!
Mark R. Jahnke
mjahnke@shrike.depaul.edu
http://www.geocities.com/MotorCity/Downs/2997/
ICQ: 30406993
On Fri, 16 Jul 1999, Michael King wrote:
> Changing a sway bar is probably one of the simplest things you will do
> to your Neon. Just jack it up, unbolt the endlinks, then unbolt the
> center, two bolts. Change the bushings and installation is the reverse
> of removal. That simple. Shouldn't take more than 10 minutes. Good luck.
>
> Mike King
> Buccaneer Region
>
>
|