alpines
[Top] [All Lists]

Re: Engine compartment caulking

To: The Lees <jsrlee@shaw.ca>
Subject: Re: Engine compartment caulking
From: Larry Paulick <larry.p@erols.com>
Date: Mon, 12 May 2003 09:09:30 -0700
Ryan, go to a good body shop supplier/distributor and get the body seam 
material use for this purpose.  It is paintable, flexible, and made 
specifically for this application.

Larry

The Lees wrote:
> My engine compartment is stripped and I'm going to lay down the spray on
> primer and a finish coat. I know the factory had caulking at the lowest
> part of the wheel well where it meets the firewall. I'll probably fill
> that up with a good quality silicone, unless somebody knows a better
> alternative. My dad thinks there was factory caulking on his Tiger on
> the piece at the top of the cowl (the one that holds the heater nose
> inlets).  Does anyone know of any other areas I should cover before I go
> any further?
>  
>  
> Cheers,
>  
>  
> Ryan Lee
> Edmonton, Canada
> B395000793 LRX  S5 Alpine.
> 



#################################################################
#################################################################
#################################################################
#####
#####
#####
#################################################################
#################################################################
#################################################################

<Prev in Thread] Current Thread [Next in Thread>