In a message dated 29/11/2007 15:29:56 GMT Standard Time, stan.foster@hp.com
writes:
I don't see why the Lucas PI would not fit any US TR6 assuming it is the
appropriate kit for the year. You will need a PI cam, raise the CR on the
head, PI valve springs, the pedestal for the MU, a PI dizzy, fuel pump (pref
not the original Lucas pump) relief valve and plumbing, and mods to the tank
for the fuel return in addition to the MU, Plenum, throttle bodies,
injectors,
pipes etc. Definitely doable and there are a few around in the US (6's and
5's)
Thats quite correct Stan and also the narrow port cylinder head will not
work because the PI inlet manifolds were never made for the narrow port head,
these being for the wider port head only.
Alan
|