| To: | "'6pack'" <6pack@autox.team.net> |
|---|---|
| Subject: | Re: Oil Cooler |
| From: | "Kai M. Radicke" <kradicke@wishboneclassics.com> |
| Date: | Wed, 29 Mar 2006 16:56:27 -0500 |
> I used a stiff bristle brush (no, NOT wire, but nylon type > bristles) and Simple Green mixed 50/50 with water. Rinse > with hose, no nozzle. Seemed to work fine. Simple Green is corrosive to aluminum, and the oil cooler housing is aluminum, so I would recommend against. I have learned that from experience, and SOME of the Simple Green packaging does have a note about aluminum use, some other packaging does not say anything at all. Kai |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Source of long rod end bearings, Chuck Arnold |
|---|---|
| Next by Date: | RE: 6 Pack Magazine, Robert Liam Gannon |
| Previous by Thread: | RE: Oil Cooler, Kevin McNelis |
| Next by Thread: | MGB Forum??, TRsick |
| Indexes: | [Date] [Thread] [Top] [All Lists] |