Re: Valve/Piston Interference

[tr6taylor@webtv.net (Sally or Dick Taylor)]

Chuck---Yep. You be runnin' wit da Big Dogs! 

Dick
 
From: triosan@gmail.com(Chuck Arnold) 

So Dick and Mark, 
I agree, keeping that chain on and the timing correct is paramount. 
My head is shaved to 3.3 inches from stock 3.54, the pistons sit flush
with the top of the block, and the vlave lift with standard rockers is
.5 inches [using a Kastner S9 cam].  All this means, according to
Dick's calculations, my valves will stick down into the cylinder about
.1 inches at full open.
Chuck