John:
My experience has been similar. The replacement spring seems to
be weaker than the original spring. I usually need to tug on the hood to
get it to raise.
Vance
-----Original Message-----
From: owner-6pack@autox.team.net [mailto:owner-6pack@autox.team.net] On
Behalf Of JOHN JOHNSON
Sent: Friday, August 26, 2005 7:57 PM
To: 6pack@autox.team.net
Subject: Bonnet Release
Hi Guys, We all hear about all the bonnet release problems. I replaced
my
release cable, striker and spring mechanism with new parts from TRF. The
spring peice that mounts to the bonnet seems flimsy at best and I see
why so
many guys remove that little release handle that mounts to the bonnet.
The
problem on mine is that even with the new parts that spring seem weak
and
barely lifts the bonnet. Has anyone dealt with and solved these issues?
Thanks guys.
|