I have the same problem... I have drilled a 1/4" hole in the bell housing
and sprayed lithium grease on the throwout bearing/transmission shaft and
this seems to help...Have some one cycle the clutch while you are
spraying... Bob 76 TR-6
----- Original Message -----
From: "Sean OBrien" <saob_100@yahoo.com>
To: <6pack@autox.team.net>
Sent: Friday, August 05, 2005 10:27 PM
Subject: Clutch Pressure
> Dear Listers,
>
> I was driving my TR6 today and I noticed that as the
> car warms, the clutch becomes more and more difficult
> to release slowly and controlled. It seems to want to
> jump from disengaged to engaged an inch or so at a
> time. The result is that smooth starts once the
> engine is warmed up are quite difficult.
>
> I was wondering if anyone has experienced these same
> symtoms and if so, can you narrow the reasons to one
> or two components. Any help would be appreciated from
> all. Thanks.
|