- 1. Plunger for SII Brake Master Clinder (score: 1)
- Author: ThreeFlash@aol.com
- Date: Mon, 20 May 2002 17:20:03 EDT
- Does anyone have a good seal for the old style plunger that needs two seals and is willing to part with it? If not, does anyone know if you can use the old plunger with just one seal even though it's
- /html/alpines/2002-05/msg00141.html (7,365 bytes)
- 2. Re: Plunger for SII Brake Master Clinder (score: 1)
- Author: "Tim Stiffy" <tstiffy@pulsenet.com>
- Date: Tue, 21 May 2002 20:17:46 -0700
- I'm going to rebuild both my clutch master cylinder and the slave unit. I got the rebuild kits yesterday. Did you run a brake hone in the bores? How did you keep the grit out of the check port? Any a
- /html/alpines/2002-05/msg00156.html (8,064 bytes)
- 3. Re: Plunger for SII Brake Master Clinder (score: 1)
- Author: jumpinjan <jservaites@woh.rr.com>
- Date: Tue, 21 May 2002 21:55:21 -0700
- Tim, Don't use a brake hone on the aluminum masters. It will ruin them. You need to polish the bores with 600 sandpaper wrapped around a dowel rod. Jan -- ______ ______ _______ / ____/ / ____/ / ___
- /html/alpines/2002-05/msg00165.html (7,663 bytes)
- 4. Re: Plunger for SII Brake Master Clinder (score: 1)
- Author: GSTROM99@aol.com
- Date: Tue, 21 May 2002 22:04:21 EDT
- If they're not scored, I'd consider just cleaning 'em up real well. Any attempt at honing will certainly ruin 'em. Gary
- /html/alpines/2002-05/msg00166.html (7,075 bytes)
- 5. Re: Plunger for SII Brake Master Clinder (score: 1)
- Author: <carlynneracing@charter.net>
- Date: Tue, 21 May 2002 22:46:57 -0700
- I take a piece of heavy welding rod and bend about the last 2 inches back on itself (180 degree bend), then cut a 2" wide piece of grey (ultra fine) ScotchBrite and wind it around the rod until it's
- /html/alpines/2002-05/msg00170.html (7,762 bytes)
This search system is powered by
Namazu